{"product_id":"gibraltar-dcil40-102-die-spring-4in-light-duty-green","title":"Gibraltar DCIL40-102 Die Spring 4in Light-duty Green","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GIBRALTAR DCIL40-102 is a light-duty die spring designed for use in stamping dies, presses, and tooling fixtures where controlled compression force and consistent return travel are required. Built from chromium alloy steel with a trapezoidal wire cross-section, it delivers a maximum deflection load of 561 pounds and a maximum deflection of 2.02 inches over a 4-inch free length. The green color coding follows the ISO 10243 standard for light-duty classification, making identification quick during die setup and maintenance. Toolmakers, die setters, and press maintenance technicians are the primary installers of this component.\u003c\/p\u003e\u003cp\u003eThis die spring fits standard die sets and tooling plates with a 1.5-inch hole diameter and accommodates a 0.75-inch rod diameter. It is suited for applications requiring moderate cycling in metal stamping, forming, and blanking operations at the light-duty load range. The 4-inch free length compresses to a solid length of approximately 2.02 inches at maximum load. It is appropriate for both production tooling and maintenance replacement in industrial press environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTrapezoidal wire profile increases load capacity and fatigue life compared to round-wire springs of the same envelope\u003c\/li\u003e\n\u003cli\u003eChromium alloy steel construction provides consistent spring rate and resistance to set under repeated cycling\u003c\/li\u003e\n\u003cli\u003eGreen color coding per ISO 10243 for fast visual identification as light-duty classification\u003c\/li\u003e\n\u003cli\u003eSpring rate of 277 pounds per inch delivers predictable, linear deflection behavior\u003c\/li\u003e\n\u003cli\u003eMeets NAAMS and ISO 10243 standards for dimensional and performance interchangeability\u003c\/li\u003e\n\u003cli\u003eSold individually, no minimum order required beyond one unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a direct-fit replacement for light-duty die spring positions requiring a 1.5-inch hole diameter, 0.75-inch rod diameter, and 4-inch free length in standard die sets and tooling fixtures conforming to NAAMS or ISO 10243 dimensional standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eDie springs are installed and replaced by toolmakers or die maintenance technicians during scheduled die service or when spring fatigue or set is detected. Always relieve all press pressure and lock out the press ram before removing or installing die springs. Inspect the mating rod and hole surfaces for burrs or damage that could cause uneven loading or premature wear on the spring. Do not compress the spring beyond its rated maximum deflection, as overtravel will accelerate fatigue and reduce service life.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Rating\u003c\/strong\u003e: Light-Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Deflection Load\u003c\/strong\u003e: 561 pounds (2496.45 N)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Deflection\u003c\/strong\u003e: 2.02 inches (51.31 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressed Length at Maximum Load\u003c\/strong\u003e: 2.02 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel to Solid Load\u003c\/strong\u003e: 2.0079 inches (51.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate\u003c\/strong\u003e: 277 pounds per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Shape\u003c\/strong\u003e: Trapezoidal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Chromium Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: NAAMS, ISO 10243, ISO 9001:2015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.63 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: DCIL40-102\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51717011996978,"sku":"DCIL40-102","price":21.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7261545168b7cba6cb321104b3a2fc78.jpg?v=1788534684","url":"https:\/\/voomisupply.com\/products\/gibraltar-dcil40-102-die-spring-4in-light-duty-green","provider":"Voomi Supply","version":"1.0","type":"link"}