{"product_id":"gibraltar-dcil20-25-die-spring-0-75-in-light-duty-green","title":"Gibraltar DCIL20-25 Die Spring 0.75 in Light Duty Green","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GIBRALTAR DCIL20-25 is a light-duty die spring designed for use in stamping dies, molds, and precision tooling fixtures. It features a trapezoidal wire cross-section wound from chromium alloy steel, which delivers consistent force and extended cycle life under repeated compression. The spring has a 0.75 inch hole diameter, a 0.375 inch rod diameter, and a 1 inch free length. At maximum deflection of 0.53 inches, it delivers a load of 167 pounds. Color-coded green for quick identification of its light-duty rating, this spring is a direct fit for standard NAAMS and ISO 10243 die spring applications.\u003c\/p\u003e\u003cp\u003eThis spring is suited for light-duty tooling applications in stamping, injection molding, and die-casting operations. It is commonly installed in stripper plates, lifter mechanisms, and guided spring assemblies where controlled force and accurate travel limits are required. The 0.53 inch maximum deflection and 316 pounds per inch spring rate make it appropriate for lower-force cycling operations in both production and tooling maintenance settings. Machinists, tool and die makers, and maintenance technicians typically source this part as a direct OEM-style replacement or for new fixture builds.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTrapezoidal wire cross-section for higher load capacity relative to round wire at the same envelope size\u003c\/li\u003e\n\u003cli\u003e167 pound maximum deflection load with a 316 lb\/in spring rate\u003c\/li\u003e\n\u003cli\u003e0.53 inch maximum deflection and 0.5433 inch travel to solid\u003c\/li\u003e\n\u003cli\u003eChromium alloy steel construction for fatigue resistance under repeated cycling\u003c\/li\u003e\n\u003cli\u003eGreen color coding identifies light-duty rating per NAAMS and ISO 10243 standards\u003c\/li\u003e\n\u003cli\u003eMeets NAAMS, ISO 10243, and ISO 9001:2015 quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-build component for light-duty die spring applications conforming to NAAMS and ISO 10243 dimensional standards, with a 0.75 inch hole diameter and 0.375 inch rod diameter envelope.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by tool and die makers or maintenance machinists during die repair or fixture assembly. Ensure the mating rod diameter does not exceed 0.375 inches and that the bore accepting the spring is sized to the 0.75 inch hole diameter to prevent binding. Never compress the spring beyond its rated maximum deflection of 0.53 inches, as operating past the travel-to-solid dimension will cause permanent deformation and premature failure. De-energize and lockout any press or hydraulic system before servicing springs in an active die assembly.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Deflection\u003c\/strong\u003e: 0.53 inches (13.46 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel To Solid\u003c\/strong\u003e: 0.5433 inches (13.80 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressed Length At Maximum Load\u003c\/strong\u003e: 0.53 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Deflection Load\u003c\/strong\u003e: 167 pounds (743.15 N)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate\u003c\/strong\u003e: 316 lb\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Rating\u003c\/strong\u003e: Light-Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Shape\u003c\/strong\u003e: Trapezoidal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Chromium Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Code\u003c\/strong\u003e: Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0396 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: NAAMS, ISO 10243, ISO 9001:2015\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: DCIL20-25\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51702531883314,"sku":"DCIL20-25","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4a248040e155ede1d38e4b94c82738f8.jpg?v=1788411829","url":"https:\/\/voomisupply.com\/products\/gibraltar-dcil20-25-die-spring-0-75-in-light-duty-green","provider":"Voomi Supply","version":"1.0","type":"link"}