{"product_id":"gibraltar-dcil16-51-die-spring-light-duty-green","title":"Gibraltar DCIL16-51 Die Spring Light-duty Green","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GIBRALTAR DCIL16-51 is a light-duty die spring designed for use in tooling, stamping, and press die assemblies where consistent, repeatable compression force is required. Built from chromium alloy steel with a trapezoidal wire cross-section, this spring delivers a maximum deflection load of 106 pounds and a spring rate of 89 pounds per inch. The green color-coding identifies it as a light-duty rating per industry standards. With a free length of 2 inches and a hole diameter of 0.625 inches, it fits standard die sets used by tool and die makers, maintenance technicians, and industrial press operators.\u003c\/p\u003e\u003cp\u003eThis die spring is suited for light-duty press tooling applications in automotive, metal fabrication, and general manufacturing environments. It installs into standard die spring pockets where a 0.625 inch hole diameter and an 11\/32 inch (0.3438 inch) rod diameter are specified. The 2 inch free length compresses to a solid height of approximately 1.19 inches at maximum load. This part meets NAAMS, ISO 10243, and ISO 9001:2015 standards, making it appropriate for quality-controlled production tooling environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLight-duty green color code per NAAMS and ISO 10243 standards for easy identification in multi-spring die sets\u003c\/li\u003e\n\u003cli\u003eTrapezoidal wire cross-section provides higher load capacity relative to round-wire springs of the same envelope size\u003c\/li\u003e\n\u003cli\u003eMaximum deflection load of 106 pounds with a spring rate of 89 pounds per inch\u003c\/li\u003e\n\u003cli\u003eMaximum deflection of 1.19 inches with a travel to solid of 1.185 inches\u003c\/li\u003e\n\u003cli\u003eChromium alloy steel construction for durability in repetitive-cycle tooling applications\u003c\/li\u003e\n\u003cli\u003eComplies with NAAMS, ISO 10243, and ISO 9001:2015 standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a light-duty die spring replacement or new installation for standard die sets requiring a 0.625 inch hole diameter, an 11\/32 inch rod diameter, and a 2 inch free length per NAAMS and ISO 10243 dimensional standards.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eDie spring installation is typically performed by tool and die makers or maintenance machinists. Fully de-energize and lock out the press before removing or installing any die components. Do not exceed the rated maximum deflection of 1.19 inches, as over-compression will reduce service life and may cause spring failure. Inspect the spring pocket bore and guide rod for wear or misalignment before installing a replacement spring.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter\u003c\/strong\u003e: 0.3438 inches (11\/32 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressed Length at Maximum Load\u003c\/strong\u003e: 1.19 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Deflection\u003c\/strong\u003e: 1.19 inches (30.23 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTravel to Solid Load\u003c\/strong\u003e: 1.185 inches (30.10 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Deflection Load\u003c\/strong\u003e: 106 pounds (471.70 N)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate\u003c\/strong\u003e: 89 pounds per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Rating\u003c\/strong\u003e: Light-Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Code\u003c\/strong\u003e: Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Shape\u003c\/strong\u003e: Trapezoidal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Chromium Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: NAAMS, ISO 10243, ISO 9001:2015\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.041 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: DCIL16-51\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51689135309106,"sku":"DCIL16-51","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/75b76c6950006e813cebe74292437220.jpg?v=1788255147","url":"https:\/\/voomisupply.com\/products\/gibraltar-dcil16-51-die-spring-light-duty-green","provider":"Voomi Supply","version":"1.0","type":"link"}