{"product_id":"gibraltar-dcil10-76-die-spring-3-8-in-light-duty-green","title":"Gibraltar DCIL10-76 Die Spring 3\/8 in Light-duty Green","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GIBRALTAR DCIL10-76 is a light-duty die spring designed for use in tooling, stamping dies, and industrial press applications. Built from chromium alloy steel with a trapezoidal wire cross-section, this spring delivers a maximum deflection load of 41.00 pounds and a maximum deflection of 1.71 inches over a 3-inch free length. The green color coding follows the ISO 10243 international standard for light-duty classification, making identification straightforward during tooling setup and maintenance. It weighs approximately 0.02 pounds and is sold individually. This component is typically installed and serviced by tool-and-die technicians, maintenance machinists, and industrial equipment specialists.\u003c\/p\u003e\u003cp\u003eThis die spring suits light-duty applications in stamping dies, injection molds, jigs, and fixtures where consistent return force and controlled deflection are required. The 3\/8-inch hole diameter and 3\/16-inch rod diameter dimensions make it compatible with standard light-duty die spring cavities and guide rods in production tooling environments. It is suited for both original equipment builds and maintenance replacement in manufacturing and industrial settings.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLight-duty classification with green color coding per ISO 10243 international standard\u003c\/li\u003e\n\u003cli\u003eTrapezoidal wire shape for higher load capacity relative to round wire in the same envelope\u003c\/li\u003e\n\u003cli\u003eChromium alloy steel construction for fatigue resistance under cyclic loading\u003c\/li\u003e\n\u003cli\u003eSpring rate of 24.00 pounds per inch for predictable, linear deflection behavior\u003c\/li\u003e\n\u003cli\u003eMeets NAAMS and ISO 10243 standards; manufactured under ISO 9001:2015 registered quality system\u003c\/li\u003e\n\u003cli\u003eCompact 3-inch free length compresses to 1.71 inches at maximum load\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or build-specification die spring for light-duty tooling applications requiring a 3\/8-inch hole diameter, 3\/16-inch rod diameter, and 3-inch free length in standard die spring pockets.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and replacement should be performed by qualified tool-and-die technicians or maintenance personnel with the press or tooling fully de-energized and locked out per applicable OSHA lockout\/tagout procedures. Verify that the mating guide rod diameter and spring pocket bore match the 3\/16-inch rod and 3\/8-inch hole specifications before installation. Do not exceed the rated maximum deflection of 1.71 inches, as over-compression will reduce service life and may cause premature failure. Inspect the spring seat and guide rod for wear or damage before reinstalling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Diameter\u003c\/strong\u003e: 0.1875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Deflection\u003c\/strong\u003e: 1.71 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressed Length at Maximum Load\u003c\/strong\u003e: 1.71 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Deflection Load\u003c\/strong\u003e: 41.00 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate\u003c\/strong\u003e: 24.00 pounds per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty Rating\u003c\/strong\u003e: Light-Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Shape\u003c\/strong\u003e: Trapezoidal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Chromium Alloy Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: NAAMS, ISO 10243, ISO 9001:2015 Registered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: DCIL10-76\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51691906728242,"sku":"DCIL10-76","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fa93b48b277f807e322f793a80ec43a5.jpg?v=1788290940","url":"https:\/\/voomisupply.com\/products\/gibraltar-dcil10-76-die-spring-3-8-in-light-duty-green","provider":"Voomi Supply","version":"1.0","type":"link"}