{"product_id":"gibraltar-bhg3711-g-steel-shoulder-bushing-0-8755in-id","title":"Gibraltar BHG3711-G Steel Shoulder Bushing 0.8755in Id","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GIBRALTAR BHG3711-G is a steel die mold shoulder bushing designed to guide and locate tooling components within die sets and mold bases. It features a press-fit attachment method for secure, permanent installation in bored housings. The bushing has an inside diameter of 0.8755 inches, an overall length of 1.875 inches, and a stepped shoulder profile with a bottom outside diameter of 1.2505 inches and a top outside diameter of 1.4270 inches. It is a friction-type, non-self-lubricating bushing intended for use in precision tooling applications where controlled fit and dimensional accuracy are required. Machinists, tool-and-die makers, and mold builders typically install this component.\u003c\/p\u003e\u003cp\u003eThis bushing is suited for die sets, mold bases, and fixture plates in both production and prototype tooling environments. The shoulder design seats the bushing flush against a counterbored surface, providing a positive stop during installation. It is commonly used in stamping dies, injection mold bases, and jig-and-fixture assemblies where repeatable guide alignment is critical. The press-fit interface holds the bushing securely under normal operating loads without additional fasteners.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSteel construction for durability in die and mold tooling environments\u003c\/li\u003e\n\u003cli\u003ePress-fit attachment method for secure, permanent seating in bored housings\u003c\/li\u003e\n\u003cli\u003eShoulder body type provides a positive stop against counterbored surfaces\u003c\/li\u003e\n\u003cli\u003eInside diameter of 0.8755 inches for precise guide pin or shaft fit\u003c\/li\u003e\n\u003cli\u003eNon-self-lubricating friction bushing — requires external lubrication if running contact is present\u003c\/li\u003e\n\u003cli\u003eStepped OD profile: 1.2505 inches bottom, 1.4270 inches top with a 1.4375-inch head diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit component for standard die mold shoulder bushing applications requiring a 0.8755-inch inside diameter and 1.875-inch overall length in press-fit bored housings.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by tool-and-die makers or machinists using a hydraulic or mechanical press to seat the bushing into a properly sized bored hole. The bore in the receiving plate must be machined to the correct press-fit tolerance before installation — do not force the bushing into an undersized bore with impact tools. Verify the counterbore depth matches the head height of 0.1875 inches to ensure the shoulder seats fully. Clean and degrease the bore before pressing if the application requires a dry fit.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody Type\u003c\/strong\u003e: Shoulder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.8755 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom Outside Diameter\u003c\/strong\u003e: 1.2505 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop Outside Diameter\u003c\/strong\u003e: 1.4270 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 1.4375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.1875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment Method\u003c\/strong\u003e: Press-Fit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Friction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLubrication Type\u003c\/strong\u003e: Non-Self Lubricating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.38 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: BHG3711-G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51694379794738,"sku":"BHG3711-G","price":42.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1fc6766a6125a484212cd92f3efe17c2.jpg?v=1788323868","url":"https:\/\/voomisupply.com\/products\/gibraltar-bhg3711-g-steel-shoulder-bushing-0-8755in-id","provider":"Voomi Supply","version":"1.0","type":"link"}