{"product_id":"gibraltar-61401tg-m6x1-00-tapped-through-t-slot-nut","title":"Gibraltar 61401TG M6x1.00 Tapped Through T-slot Nut","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GIBRALTAR 61401TG is a tapped through T-slot nut machined from 1018 steel with a black oxide finish. It is designed to seat in standard T-slot tracks on milling machine tables, fixture plates, workholding systems, and similar machine tool setups. The M6x1.00 right-hand thread runs through the full body, allowing a fastener to engage from either face. The nut fits an 8 mm table slot and has a base measuring 14 mm wide by 6 mm tall, with an overall length of 19 mm and an overall height of 10 mm. Machinists, toolmakers, and fixture builders install this nut when setting up workholding, stops, clamps, or jigs on T-slotted surfaces.\u003c\/p\u003e\n\u003cp\u003eThis nut suits metric T-slot applications in both manual and CNC machining environments. The through-tapped design gives full thread engagement across the body, supporting consistent clamping force without the risk of bottoming out a fastener. The black oxide coating provides a degree of corrosion resistance appropriate for shop floor conditions. It is sold individually, making it practical for single-position replacement or low-quantity fixture builds alongside matched T-slot bolts and strap clamps.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eThrough-tapped M6x1.00 right-hand thread for full fastener engagement from either side\u003c\/li\u003e\n  \u003cli\u003eFits 8 mm T-slot table tracks on milling machines and fixture plates\u003c\/li\u003e\n  \u003cli\u003e1018 steel construction with black oxide finish for shop-floor corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eBase dimensions of 14 mm wide by 6 mm tall seat securely in standard metric slots\u003c\/li\u003e\n  \u003cli\u003eOverall length of 19 mm and overall height of 10 mm for compact fitment\u003c\/li\u003e\n  \u003cli\u003eMetric system of measurement throughout; UNSPSC 31161733\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in T-slot tracks with an 8 mm slot width, consistent with standard metric milling machine tables and fixture plate systems that accept M6 fasteners.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or toolmakers as part of workholding or fixture setup. Always power down and lock out the machine before inserting or adjusting T-slot hardware. Slide the nut into the open end of the T-slot track and rotate 90 degrees to seat the base, then thread in the mating bolt or stud by hand before applying final torque with a wrench. Confirm the nut is fully seated in the slot before applying clamping loads to prevent pull-out or slot damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: M6x1.00\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNut Type\u003c\/strong\u003e: T-Slot, Through Tapped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor Table Slot Size\u003c\/strong\u003e: 8 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlot Width\u003c\/strong\u003e: 7.94 mm (approximately 5\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase Width\u003c\/strong\u003e: 14 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase Height\u003c\/strong\u003e: 6 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 19 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 10 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel, Grade 1018\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Black Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Metric\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31161733\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 61401TG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51712169115954,"sku":"61401TG","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/174b512966160c697eafbf0038dcfd20.jpg?v=1788484643","url":"https:\/\/voomisupply.com\/products\/gibraltar-61401tg-m6x1-00-tapped-through-t-slot-nut","provider":"Voomi Supply","version":"1.0","type":"link"}