{"product_id":"gibraltar-30407g-clamp-strap-5-8-inch-stud-tapered-nose","title":"Gibraltar 30407G Clamp Strap 5\/8 Inch Stud Tapered Nose","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GIBRALTAR 30407G is a steel clamp strap designed for workholding and fixturing applications in machine shops and fabrication environments. It features a tapered nose profile and plain heel, providing a straightforward clamping geometry suited for securing workpieces to T-slot tables, milling machine beds, and similar fixtures. The strap measures 2.5 inches in overall length, 1.25 inches wide, and 0.625 inches high, with a 9\/16 inch travel range. Manufactured from 1018 steel with a black finish, it delivers reliable strength and corrosion resistance for repeated use in production settings. Machinists and tooling technicians are the primary installers of this component.\u003c\/p\u003e\n\u003cp\u003eThis clamp strap is used in standard workholding setups on milling machines, drill presses, and surface grinders where a 5\/8 inch stud is required. The tapered nose allows the strap to wedge against a step block or riser, converting stud tension into consistent downward clamping force on the workpiece. It is appropriate for both one-off setups and repetitive production fixturing. The non-serrated, non-tapped design keeps setup time minimal and suits applications where the strap is repositioned frequently.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTapered nose profile for positive contact against step blocks and riser sets\u003c\/li\u003e\n  \u003cli\u003ePlain heel design for clean seating on flat fixture surfaces\u003c\/li\u003e\n  \u003cli\u003e1018 steel construction provides good machinability and tensile strength\u003c\/li\u003e\n  \u003cli\u003e9\/16 inch travel accommodates a range of workpiece heights\u003c\/li\u003e\n  \u003cli\u003eBlack finish for surface protection during storage and use\u003c\/li\u003e\n  \u003cli\u003eNon-serrated, non-tapped body simplifies repositioning during setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with 5\/8 inch studs in standard T-slot workholding setups on milling machines, drill presses, and similar machine tool fixtures.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or tooling technicians as part of a workholding setup. Ensure the machine table and T-slot hardware are clean and free of chips before positioning the strap. The stud, strap, step block, and T-nut should be aligned so that the clamp applies force as close to the workpiece as practical to minimize deflection. Always power down and lock out the machine before making any adjustments to fixturing components.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: 1018\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStud Size\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTravel\u003c\/strong\u003e: 9\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSlot Length\u003c\/strong\u003e: 0.563 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenterline of Slot to Nose\u003c\/strong\u003e: 0.969 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Type\u003c\/strong\u003e: Tapered\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeel Type\u003c\/strong\u003e: Plain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSerrated\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTapped\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.62 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GIBRALTAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 30407G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GIBRALTAR","offers":[{"title":"Default Title","offer_id":51754896032050,"sku":"30407G","price":24.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0474de9373ce73ce7c0402ef7dfd9a0e.jpg?v=1788949604","url":"https:\/\/voomisupply.com\/products\/gibraltar-30407g-clamp-strap-5-8-inch-stud-tapered-nose","provider":"Voomi Supply","version":"1.0","type":"link"}