{"product_id":"gearwrench-84318n-3-8-in-drive-17mm-impact-socket-6-pt","title":"Gearwrench 84318N 3\/8 in Drive 17mm Impact Socket 6-pt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GEARWRENCH 84318N is a 6-point impact socket designed for use with 3\/8 inch drive impact wrenches and ratchets. Sized at 17mm, it is machined from chromium-molybdenum steel and finished in black oxide for corrosion resistance. The overall length is 1.181 inches, placing it in the standard-length category. Off-corner loading geometry reduces stress concentration on fastener flats, helping prevent rounding under high-torque impact use. High-visibility laser-etched markings provide fast size identification in the field, with secondary hard-stamped markings as a backup. Licensed technicians and mechanics will find this socket meets ASME B107.33M standards for impact socket performance and dimensional consistency.\u003c\/p\u003e\n\u003cp\u003eThis socket is intended for metric fastener applications in automotive, heavy equipment, and general mechanical service environments. The 3\/8 inch drive size suits mid-range torque applications where a 1\/2 inch drive would be excessive and a 1\/4 inch drive would be insufficient. Standard length makes it appropriate for most open-access fastener locations. It is not insulated and is not rated as non-sparking, so it is suited for conventional mechanical service rather than electrical or hazardous-environment work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e6-point contact geometry with off-corner loading design reduces fastener rounding under impact\u003c\/li\u003e\n  \u003cli\u003eChromium-molybdenum steel construction handles the cyclic stress of impact tool use\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish provides surface corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eHigh-visibility laser-etched size markings with secondary hard-stamped backup markings\u003c\/li\u003e\n  \u003cli\u003eMeets ASME B107.33M impact socket standard\u003c\/li\u003e\n  \u003cli\u003eLifetime warranty from the manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard-length 3\/8 inch drive impact socket compatible with 3\/8 inch drive impact wrenches, air ratchets, and hand ratchets used on 17mm metric fasteners.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis socket is installed and removed by hand onto any 3\/8 inch square drive tool. Always confirm the socket is fully seated on the drive before applying torque. Do not use impact sockets on torque-sensitive fasteners without a calibrated torque wrench or torque stick. Inspect the socket for cracks or deformation before each use and remove it from service if damage is found.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrive Size\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSocket Size\u003c\/strong\u003e: 17mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrive Style\u003c\/strong\u003e: Hex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Points\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.181 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.98 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 0.98 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Chromium-Molybdenum Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Black Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulated\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNon-Sparking\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.13 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ASME B107.33M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: Lifetime\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GEARWRENCH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 84318N\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GEARWRENCH","offers":[{"title":"Default Title","offer_id":51539401834802,"sku":"84318N","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f35450d673311e3054b5c539aded24d9.jpg?v=1785839284","url":"https:\/\/voomisupply.com\/products\/gearwrench-84318n-3-8-in-drive-17mm-impact-socket-6-pt","provider":"Voomi Supply","version":"1.0","type":"link"}