{"product_id":"gardner-spring-36605gs-precision-compression-spring","title":"Gardner Spring 36605GS Precision Compression Spring","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GARDNER SPRING 36605GS is a precision compression spring manufactured from stainless steel and designed for applications that demand consistent, repeatable force across a defined travel range. With an outside diameter of 0.845 inches and a free length of 3 inches, this spring delivers a maximum work load of 41 pounds and a spring rate of 20 pounds per inch. The closed and ground end configuration ensures stable, square seating against mating surfaces, reducing lateral deflection during compression. Machinists, maintenance technicians, and mechanical assembly professionals install this type of spring in equipment requiring controlled resistance and reliable cycling over time.\u003c\/p\u003e\n\u003cp\u003eThis compression spring suits a wide range of industrial and mechanical assembly scenarios where precise load and rate tolerances are required. The 0.845 inch outside diameter is sized to fit into a bore or housing up to 0.875 inches in diameter, making it appropriate for valve assemblies, actuator mechanisms, tool and die setups, and general-purpose mechanical equipment. The stainless steel construction makes it a practical choice in environments where corrosion resistance or contact with moisture is a concern.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eClosed and ground ends provide flat, stable seating and minimize tilt under load\u003c\/li\u003e\n  \u003cli\u003eStainless steel construction (AISI 302) resists corrosion in wet or chemically exposed environments\u003c\/li\u003e\n  \u003cli\u003eMaximum work load of 41 pounds supports moderate-duty compression applications\u003c\/li\u003e\n  \u003cli\u003eSpring rate of 20 pounds per inch delivers predictable, linear force response\u003c\/li\u003e\n  \u003cli\u003e0.0909 inch wire diameter and 1.185 inch solid height confirm tight manufacturing tolerances\u003c\/li\u003e\n  \u003cli\u003eMeets AISI 302, ASTM A228, and ASTM A313 material standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a precision-grade replacement or original-equipment compression spring for mechanical assemblies requiring an 0.845 inch outside diameter, 3 inch free length, and 41 pound maximum work load in a closed and ground end configuration.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by mechanical technicians or maintenance personnel familiar with spring-loaded assemblies. Depressurize or de-energize the assembly completely before removing or installing any compression spring. Verify that the mating bore diameter does not exceed 0.875 inches and that the seating surfaces are clean and flat to prevent cocking or uneven loading. Never compress a spring beyond its solid height, as doing so can cause permanent set and compromise load performance.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Type\u003c\/strong\u003e: Precision Compression\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.845 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFree Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Diameter\u003c\/strong\u003e: 0.0909 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSolid Height\u003c\/strong\u003e: 1.185 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Work Load\u003c\/strong\u003e: 41 pounds (162.36 N)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate\u003c\/strong\u003e: 20 pounds per inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Closed and Ground\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended Hole Diameter\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Plain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: AISI 302, ASTM A228, ASTM A313\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31161904\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GARDNER SPRING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36605GS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GARDNER SPRING","offers":[{"title":"Default Title","offer_id":51995098218802,"sku":"36605GS","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/739e55c487d3e6fad62a00a5b2f32b8f.jpg?v=1789992453","url":"https:\/\/voomisupply.com\/products\/gardner-spring-36605gs-precision-compression-spring","provider":"Voomi Supply","version":"1.0","type":"link"}