{"product_id":"gardner-spring-36413g-precision-compression-spring","title":"Gardner Spring 36413G Precision Compression Spring","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GARDNER SPRING 36413G is a precision compression spring manufactured from music wire to meet close-tolerance mechanical and industrial applications. It measures 0.36 inches in outside diameter with a 2-inch free length and a wire diameter of 0.032 inches. The spring delivers a rated spring rate of 4 pounds per inch and supports a maximum work load of 6 pounds. Closed and ground ends provide flat, stable seating against mating surfaces. Finish is plain silver. This part is suited for use in assemblies requiring consistent, repeatable force characteristics in a compact form factor.\u003c\/p\u003e\u003cp\u003eThis compression spring is commonly used in light-duty mechanical assemblies, valve mechanisms, tooling fixtures, and precision equipment where controlled force and accurate deflection are required. The compact outside diameter and 2-inch free length make it a practical fit for spring pockets or bores up to 0.375 inches in diameter. It is appropriate for both original equipment manufacturing and maintenance or repair applications across industrial, HVAC, plumbing, and general mechanical trades.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter of 0.36 inches fits standard 0.375-inch (3\/8-inch) hole diameter\u003c\/li\u003e\n\u003cli\u003eSpring rate of 4 pounds per inch for predictable, linear deflection\u003c\/li\u003e\n\u003cli\u003eMaximum work load rated at 6 pounds (27.80 newtons)\u003c\/li\u003e\n\u003cli\u003eClosed and ground ends for flat seating and reduced buckling tendency\u003c\/li\u003e\n\u003cli\u003eMusic wire construction meets AISI 302, ASTM A228, and ASTM A313 standards\u003c\/li\u003e\n\u003cli\u003eSolid height of 0.421 inches for compact compression travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in spring pockets or bores with a hole diameter up to 0.375 inches. Suitable as a precision replacement compression spring in light-duty mechanical assemblies requiring a 0.36-inch OD and 2-inch free length specification.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by mechanical technicians or trades personnel as part of assembly, valve, or actuator service. Relieve all system pressure and de-energize the equipment before disassembling any spring-loaded component. Verify that the replacement spring OD, free length, wire diameter, and spring rate match the application requirements before installation. Do not compress the spring beyond its solid height during installation or operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Diameter\u003c\/strong\u003e: 0.032 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate\u003c\/strong\u003e: 4 pounds per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Work Load\u003c\/strong\u003e: 6 pounds (27.80 newtons)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Height\u003c\/strong\u003e: 0.421 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter (Recommended)\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Closed and Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Music Wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Plain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Type\u003c\/strong\u003e: Precision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: AISI 302, ASTM A228, ASTM A313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31161904\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GARDNER SPRING\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36413G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GARDNER SPRING","offers":[{"title":"Default Title","offer_id":52107040588082,"sku":"36413G","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/60a2073efc380d254190788aae949537.jpg?v=1790073967","url":"https:\/\/voomisupply.com\/products\/gardner-spring-36413g-precision-compression-spring","provider":"Voomi Supply","version":"1.0","type":"link"}