{"product_id":"gardner-spring-36111g-precision-compression-spring","title":"Gardner Spring 36111G Precision Compression Spring","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GARDNER SPRING 36111G is a precision compression spring manufactured from music wire with a plain silver finish. It measures 0.6 inches in outside diameter and 0.75 inches in free length, with a wire diameter of 0.072 inches. The spring delivers a rated spring rate of 78 lb\/in and supports a maximum work load of 30 pounds (133.45 N). Closed and ground ends provide stable seating and consistent load transfer under compression. This part is suited for precision mechanical assemblies where repeatable force and compact dimensions are required. Maintenance technicians, machine builders, and OEM assemblers are the typical end users.\u003c\/p\u003e\u003cp\u003eThis compression spring is appropriate for use in compact mechanical subassemblies across HVAC equipment, plumbing fixtures, electrical enclosures, and general industrial machinery. Its small form factor and high spring rate relative to its size make it a practical choice for valve mechanisms, actuator returns, and other applications requiring controlled compression force within a tight envelope. The solid height of 0.397 inches sets the compression limit for travel calculations during design or replacement work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eClosed and ground end type for flat, stable seating under load\u003c\/li\u003e\n\u003cli\u003eSpring rate of 78 lb\/in for predictable, linear force response\u003c\/li\u003e\n\u003cli\u003eMaximum work load of 30 pounds (133.45 N)\u003c\/li\u003e\n\u003cli\u003eMusic wire construction meets AISI 302, ASTM A228, and ASTM A313 standards\u003c\/li\u003e\n\u003cli\u003eOutside diameter of 0.6 inches fits a hole diameter of 0.625 inches\u003c\/li\u003e\n\u003cli\u003eSolid height of 0.397 inches defines maximum compression travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style precision compression spring for mechanical assemblies requiring a 0.6-inch outside diameter and 0.75-inch free length with closed and ground ends.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by mechanical technicians or assemblers working on equipment that has been fully de-energized and depressurized before service. Verify that the mating bore diameter accommodates the 0.625-inch hole diameter specification and that available travel does not exceed the solid height. Do not pre-load the spring beyond the rated maximum work load, as permanent set or fatigue failure may result.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Type\u003c\/strong\u003e: Precision Compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Diameter\u003c\/strong\u003e: 0.072 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Height\u003c\/strong\u003e: 0.397 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate\u003c\/strong\u003e: 78 lb\/in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Work Load\u003c\/strong\u003e: 30 pounds (133.45 N)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Closed and Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Music Wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Plain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: AISI 302, ASTM A228, ASTM A313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31161904\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GARDNER SPRING\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36111G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GARDNER SPRING","offers":[{"title":"Default Title","offer_id":51971130655026,"sku":"36111G","price":15.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1e2f4ec9ebdcf5ffed2fda283b91c060.jpg?v=1789953386","url":"https:\/\/voomisupply.com\/products\/gardner-spring-36111g-precision-compression-spring","provider":"Voomi Supply","version":"1.0","type":"link"}