{"product_id":"gardner-spring-36037g-precision-compression-spring","title":"Gardner Spring 36037G Precision Compression Spring","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GARDNER SPRING 36037G is a precision compression spring manufactured from music wire with a plain finish. It features an outside diameter of 0.24 inches, a free length of 0.812 inches, and a wire diameter of 0.042 inches. The spring delivers a maximum work load of 19 pounds and a spring rate of 60 pounds per inch. Ends are closed and ground for consistent seating and load transfer. This part is suited for mechanical assemblies, valve actuators, and industrial or OEM equipment requiring a compact, reliable compression element. Installation is typically performed by mechanical technicians or OEM assembly personnel.\u003c\/p\u003e\u003cp\u003eThis compression spring is designed for use in applications where precise load and deflection characteristics are required in a small form factor. The closed and ground end configuration ensures stable, square seating against mating surfaces. With a solid height of 0.505 inches and a recommended hole diameter of 0.25 inches, it fits into standard bored housings without modification. Typical applications include instrument mechanisms, fluid control valves, latching assemblies, and light-duty industrial equipment where consistent spring force is critical.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOutside diameter of 0.24 inches fits 0.25-inch bored housings\u003c\/li\u003e\n\u003cli\u003eSpring rate of 60 pounds per inch for predictable, linear deflection\u003c\/li\u003e\n\u003cli\u003eMaximum work load of 19 pounds (84.52 N)\u003c\/li\u003e\n\u003cli\u003eClosed and ground ends for square, stable seating\u003c\/li\u003e\n\u003cli\u003eMusic wire construction meets AISI 302, ASTM A228, and ASTM A313 standards\u003c\/li\u003e\n\u003cli\u003eCompact free length of 0.812 inches with a solid height of 0.505 inches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a precision OEM-style compression spring for mechanical assemblies requiring a 0.24-inch outside diameter and 60 pounds-per-inch spring rate in a closed and ground end configuration.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eCompression springs of this type are installed by mechanical technicians or OEM assembly personnel using standard hand tools. Ensure the mating bore or housing is clean and free of burrs before seating the spring. Verify that the applied load does not exceed the rated maximum work load of 19 pounds to prevent permanent set or fatigue. Replace the spring if any coil distortion, corrosion, or loss of free length is observed during inspection.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Type\u003c\/strong\u003e: Precision Compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Work Load\u003c\/strong\u003e: 19 pounds (84.52 N)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate\u003c\/strong\u003e: 60 pounds per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.24 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Diameter\u003c\/strong\u003e: 0.042 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Length\u003c\/strong\u003e: 0.812 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Height\u003c\/strong\u003e: 0.505 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Closed and Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Music Wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Plain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: AISI 302, ASTM A228, ASTM A313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GARDNER SPRING\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36037G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GARDNER SPRING","offers":[{"title":"Default Title","offer_id":67600856449330,"sku":"36037G","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7b94a378922ee447ec588b292eb45435.jpg?v=1790426564","url":"https:\/\/voomisupply.com\/products\/gardner-spring-36037g-precision-compression-spring","provider":"Voomi Supply","version":"1.0","type":"link"}