{"product_id":"gardner-spring-36010gs-compression-spring-0-18in-od","title":"Gardner Spring 36010GS Compression Spring 0.18in Od","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe GARDNER SPRING 36010GS is a precision compression spring manufactured from stainless steel with a plain finish. It measures 0.18 inches in outside diameter and 0.5 inches in free length, with a wire diameter of 0.016 inches. The spring delivers a maximum work load of 1.3 pounds and a spring rate of 3.91 pounds per inch. Closed and ground ends provide stable seating and consistent load transfer. This spring is suited for use in light-duty mechanical assemblies, instrumentation, valves, and precision equipment where corrosion resistance and dimensional accuracy are required. Technicians and assemblers working in industrial, HVAC, or fluid-control applications install this spring type as a standard component.\u003c\/p\u003e\n\u003cp\u003eThe 36010GS is appropriate for small-bore assemblies requiring a compact, low-load compression spring. Its 0.187-inch hole diameter fitment and 0.113-inch solid height make it well suited for tight-clearance installations in valves, actuators, sensors, and similar mechanical components. The stainless steel construction resists corrosion in wet or chemically active environments. Sold in packages of five units with a minimum order quantity of one package.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eStainless steel construction meets AISI 302, ASTM A228, and ASTM A313 standards\u003c\/li\u003e\n  \u003cli\u003eClosed and ground ends for flat, stable seating under load\u003c\/li\u003e\n  \u003cli\u003e0.18-inch outside diameter fits 0.187-inch bore diameter applications\u003c\/li\u003e\n  \u003cli\u003e1.3-pound maximum work load with a 3.91 lb\/in spring rate\u003c\/li\u003e\n  \u003cli\u003e0.113-inch solid height suits tight-clearance, compact assemblies\u003c\/li\u003e\n  \u003cli\u003ePlain silver finish with no coating that could affect dimensional tolerance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a precision replacement or service compression spring for small-bore mechanical assemblies requiring a 0.18-inch OD, 0.5-inch free length, closed and ground end configuration in stainless steel.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by mechanical technicians or assemblers working on valves, instrumentation, or precision mechanical components. Ensure the mating bore and pilot dimensions match the spring outside diameter and wire size before installation. Relieve system pressure and de-energize any actuators or powered components before removing or replacing compression springs. Avoid overcompressing the spring beyond its solid height of 0.113 inches, as this will cause set and permanent loss of load capacity.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Type\u003c\/strong\u003e: Precision Compression\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Work Load\u003c\/strong\u003e: 1.3 pounds (5.80 N)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate\u003c\/strong\u003e: 3.91 lb\/in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.18 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Diameter\u003c\/strong\u003e: 0.016 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFree Length\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSolid Height\u003c\/strong\u003e: 0.113 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.187 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Closed and Ground\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Plain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: AISI 302, ASTM A228, ASTM A313\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31161904\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GARDNER SPRING\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36010GS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GARDNER SPRING","offers":[{"title":"Default Title","offer_id":52073730441522,"sku":"36010GS","price":15.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5520d83a0cd5431f553a96142b302c66.jpg?v=1790050666","url":"https:\/\/voomisupply.com\/products\/gardner-spring-36010gs-compression-spring-0-18in-od","provider":"Voomi Supply","version":"1.0","type":"link"}