{"product_id":"gardner-spring-36007g-precision-compression-spring","title":"Gardner Spring 36007G Precision Compression Spring","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe GARDNER SPRING 36007G is a precision compression spring manufactured from music wire with a plain finish. It measures 0.12 inches in outside diameter and 0.5 inches in free length, making it a compact, high-cycle spring suited for tight assemblies. The spring delivers a rate of 31 pounds per inch and handles a maximum work load of 6 pounds, with a solid height of 0.309 inches. Closed and ground ends provide stable seating and consistent load transfer. Licensed technicians, mechanical assemblers, and maintenance professionals working with small mechanisms and precision equipment install this type of spring.\u003c\/p\u003e\u003cp\u003eThis spring is designed for use in precision applications where consistent load response and dimensional accuracy are required. Its compact 0.12-inch OD allows installation in bores as small as 0.125 inches. Typical use cases include instrumentation, valve assemblies, electronic hardware, and small mechanical subassemblies found in HVAC controls, plumbing valves, and general industrial equipment. The music wire construction suits applications involving repeated cycling under moderate loads.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eClosed and ground ends for stable, flat seating and accurate load measurement\u003c\/li\u003e\n\u003cli\u003e31 pounds per inch spring rate for predictable, linear deflection\u003c\/li\u003e\n\u003cli\u003e6-pound maximum work load with a solid height of 0.309 inches\u003c\/li\u003e\n\u003cli\u003eMusic wire construction meets AISI 302, ASTM A228, and ASTM A313 standards\u003c\/li\u003e\n\u003cli\u003e0.022-inch wire diameter for consistent coil geometry in small-bore applications\u003c\/li\u003e\n\u003cli\u003ePlain silver finish suitable for dry or lightly lubricated environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a precision compression spring for small-bore assemblies requiring a 0.12-inch outside diameter and 0.5-inch free length with a 0.125-inch hole diameter fitment.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is typically performed by mechanical technicians or assemblers working on small-bore valve, control, or instrumentation hardware. Ensure the bore and seat surfaces are clean and free of burrs before seating the spring. Do not compress the spring beyond its solid height of 0.309 inches during assembly, as this will damage the coils. Follow applicable equipment manufacturer guidelines for preload and assembly torque on surrounding hardware.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Diameter\u003c\/strong\u003e: 0.022 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree Length\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid Height\u003c\/strong\u003e: 0.309 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Rate\u003c\/strong\u003e: 31 pounds per inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Work Load\u003c\/strong\u003e: 6 pounds (26.69 N)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Closed and Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Music Wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Plain\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Silver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring Type\u003c\/strong\u003e: Precision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: AISI 302, ASTM A228, ASTM A313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31161904\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: GARDNER SPRING\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36007G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GARDNER SPRING","offers":[{"title":"Default Title","offer_id":52106807083314,"sku":"36007G","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2bc320e1277a419c2d997249714a50f5.jpg?v=1790073744","url":"https:\/\/voomisupply.com\/products\/gardner-spring-36007g-precision-compression-spring","provider":"Voomi Supply","version":"1.0","type":"link"}