{"product_id":"flagro-f-1000t-direct-fired-construction-heater-1000000-btu-h","title":"Flagro F-1000T Direct Fired Construction Heater 1000000 Btu\/h","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe FLAGRO F-1000T is a direct-fired forced-air construction heater rated at 1,000,000 BTU\/h, built for large-scale commercial and industrial temporary heating applications. It operates on propane or natural gas, with field selection available based on job-site fuel supply. The unit delivers 7,000 CFM of heated airflow, covers approximately 12,000 square feet, and runs on a 115-volt, 60 Hz, single-phase, 20-amp circuit with a 1 HP blower motor. Electronic ignition provides reliable startup in field conditions. Licensed HVAC technicians and commercial heating contractors are the primary installers and service personnel for equipment of this class.\u003c\/p\u003e\u003cp\u003eThe F-1000T is suited to large-volume temporary heat jobs including construction sites, industrial facilities, warehouses, aircraft hangars, and other open or semi-enclosed structures requiring substantial heat input. Its dual-fuel capability adapts to changing job-site fuel availability without requiring a separate unit. A built-in thermostat supports automated temperature regulation during extended operation. Where multiple smaller heaters would otherwise be required, the F-1000T consolidates heat delivery into a single high-output unit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1,000,000 BTU\/h heat output rated for large commercial and industrial spaces\u003c\/li\u003e\n\u003cli\u003eDual-fuel design accepts propane or natural gas with a selector valve for field switching\u003c\/li\u003e\n\u003cli\u003e7,000 CFM airflow capacity covering approximately 12,000 square feet\u003c\/li\u003e\n\u003cli\u003eElectronic ignition for dependable startup in field conditions\u003c\/li\u003e\n\u003cli\u003e115-volt, single-phase, 20-amp electrical requirement with 1 HP blower motor\u003c\/li\u003e\n\u003cli\u003eIncludes thermostat for automated temperature regulation during extended runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with propane supply at 46 pounds per hour or natural gas supply at 952 CFH. Suitable for large temporary heating applications on commercial construction sites and industrial job sites where a direct-fired forced-air heater is required.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and servicing must be performed by a qualified heating contractor or licensed HVAC technician familiar with commercial direct-fired equipment and applicable fuel-gas codes, including the IFGC. Shut off and disconnect the fuel supply before performing any service or making fuel connections. Position the unit on a stable, level surface away from combustible materials, gas cylinders, and other hazards as specified in the operating manual. Verify that the electrical supply circuit is properly rated for 115 volts, single phase, 20 amps before connecting the unit.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat Output\u003c\/strong\u003e: 1,000,000 BTU\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Type\u003c\/strong\u003e: Propane or Natural Gas (Dual Fuel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePropane Consumption\u003c\/strong\u003e: 46 pounds per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural Gas Consumption\u003c\/strong\u003e: 952 CFH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow\u003c\/strong\u003e: 7,000 CFM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate Heating Coverage\u003c\/strong\u003e: 12,000 square feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply\u003c\/strong\u003e: 115 volts, 60 Hz, 1-phase, 20 amps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor\u003c\/strong\u003e: 1 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIgnition Type\u003c\/strong\u003e: Electronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 61 x 29 x 38 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 356 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: FLAGRO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: F-1000T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FLAGRO","offers":[{"title":"Default Title","offer_id":51306860904754,"sku":"F-1000T","price":3294.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309549391.png?v=1781300667","url":"https:\/\/voomisupply.com\/products\/flagro-f-1000t-direct-fired-construction-heater-1000000-btu-h","provider":"Voomi Supply","version":"1.0","type":"link"}