{"product_id":"enerco-hsvfbf10-vent-free-blue-flame-heater-10000-btu","title":"Enerco HSVFBF10 Vent Free Blue Flame Heater 10000 Btu","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ENERCO HSVFBF10 is a 10,000 BTU vent-free blue flame heater designed for supplemental heating in spaces up to approximately 250 square feet. Available in Natural Gas and Liquid Propane configurations, it operates at 99.9% thermal efficiency and requires no flue or venting, making it a practical solution for rooms where ducted or vented heat is not available. The unit features a built-in Piezo ignition integrated into the control knob and a thermostatic manual control with five settings that modulate the flame as the room approaches the set temperature. A built-in low-oxygen shutoff (ODS) sensor automatically cuts gas flow if ambient oxygen drops below a safe level. Licensed plumbers and gas fitters typically handle installation of this type of appliance.\u003c\/p\u003e\n\u003cp\u003eThe HSVFBF10 is suited for residential supplemental heating in bedrooms, living areas, cabins, and other enclosed spaces up to 250 square feet. Blue flame technology heats room air convectively rather than radiating heat to objects, which works well in well-insulated interiors and maintains even air temperatures over time. The unit ships with both a wall-mount bracket and base feet, giving the installer two mounting options. Because it operates on gas without requiring electrical power, it continues to provide heat during power outages. The blower option is not available on this model. Natural Gas variant: HSVFBF10NG. Liquid Propane variant: HSVFBF10LP. This product cannot be shipped to California.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e10,000 BTU\/h vent-free output at 99.9% efficiency — no flue or chimney required\u003c\/li\u003e\n  \u003cli\u003eBlue flame convective heating technology for even air-temperature distribution\u003c\/li\u003e\n  \u003cli\u003ePiezo ignition built into the control knob rotation for tool-free lighting\u003c\/li\u003e\n  \u003cli\u003eFive-setting thermostatic control knob that modulates flame near set point\u003c\/li\u003e\n  \u003cli\u003eBuilt-in ODS low-oxygen shutoff sensor for indoor safety compliance\u003c\/li\u003e\n  \u003cli\u003eIncludes wall-mount bracket and base feet — floor or wall installation supported\u003c\/li\u003e\n  \u003cli\u003eOperates without electricity — maintains heat output during power outages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eThe HSVFBF10 is available in Natural Gas (HSVFBF10NG) and Liquid Propane (HSVFBF10LP) versions. Verify fuel type before ordering. Designed as a vent-free supplemental wall or floor heater for residential and light-commercial spaces up to approximately 250 square feet.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation must be performed by a licensed plumber or gas fitter in accordance with local codes, NFPA 54 (National Fuel Gas Code), and the manufacturer instructions supplied with the unit. Shut off the gas supply at the service valve before making or breaking any gas connections. Minimum clearances must be observed: 36 inches above the unit to the ceiling, 3 inches from the bottom of the unit to the floor when using base feet, and 10 inches to each side wall. For wall mounting, the manufacturer recommends a mounting height of 36 inches from the floor. Vent-free heaters must not be installed in bathrooms, bedrooms smaller than the minimum room-size requirement stated in the installation manual, or in any jurisdiction that prohibits vent-free appliances — this product cannot be shipped to California.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeating Output\u003c\/strong\u003e: 10,000 BTU\/h\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e: 99.9%\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFuel Type\u003c\/strong\u003e: Natural Gas or Liquid Propane\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVenting Type\u003c\/strong\u003e: Vent Free\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlame Type\u003c\/strong\u003e: Blue Flame\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIgnition Type\u003c\/strong\u003e: Standing Pilot with Piezo\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eControl Type\u003c\/strong\u003e: Manual Thermostatic (5 settings)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInstallation Type\u003c\/strong\u003e: Floor or Wall Mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGas Connection Size\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManifold Pressure\u003c\/strong\u003e: 4.5 inches w.c.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInlet Gas Pressure Minimum\u003c\/strong\u003e: 7.0 inches w.c. (NG) \/ 14.0 inches w.c. (LP)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInlet Gas Pressure Maximum\u003c\/strong\u003e: 14.0 inches w.c. (NG) \/ 14.0 inches w.c. (LP)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Top to Ceiling\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Bottom to Floor\u003c\/strong\u003e: 3 inches minimum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance to Side Wall\u003c\/strong\u003e: 10 inches minimum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 15.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDepth\u003c\/strong\u003e: 7.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 20 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNet Weight\u003c\/strong\u003e: 18 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: CSA, ANSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ENERCO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HSVFBF10\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ENERCO","offers":[{"title":"Default Title","offer_id":51284076986674,"sku":"HSVFBF10","price":353.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/309279900.jpg?v=1781067918","url":"https:\/\/voomisupply.com\/products\/enerco-hsvfbf10-vent-free-blue-flame-heater-10000-btu","provider":"Voomi Supply","version":"1.0","type":"link"}