{"product_id":"emuge-bu921000-5007-thread-forming-tap-10-24-unc-2bx","title":"Emuge BU921000.5007 Thread Forming Tap 10-24 Unc 2BX","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EMUGE BU921000.5007 is a thread forming tap in the Rekord Druck-S series, designed for cold-forming internal threads in steel without cutting or producing chips. Operating on a 10-24 UNC thread standard with a 2BX class of fit, this tap displaces material rather than removing it, producing stronger threads with improved surface finish. It is manufactured from High-Speed Steel-E (cobalt-bearing) and carries a nitride coating for enhanced wear resistance and reduced friction. With a modified bottoming chamfer of 2 to 3 threads, it is suited for both blind hole and through-hole threading applications. Licensed machinists and tool-and-die professionals install this tap in production and maintenance environments.\u003c\/p\u003e\u003cp\u003eThis tap is intended for threading steel workpieces in blind hole and through-hole configurations. The modified bottoming chamfer allows threading close to the bottom of a blind hole, making it practical for tight-tolerance assemblies. The 10-24 UNC thread form is common in light fastener applications across industrial and commercial manufacturing. The Druck 1-STEEL-SN-NT trade designation indicates the tap is optimized specifically for steel materials under the P material application code, covering a broad range of carbon, alloy, and tool steels.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThread forming (chipless) operation produces stronger threads and eliminates chip evacuation concerns in blind holes\u003c\/li\u003e\n\u003cli\u003eHigh-Speed Steel-E (cobalt) construction provides elevated heat and wear resistance\u003c\/li\u003e\n\u003cli\u003eNitride coating reduces friction and extends tap life in steel applications\u003c\/li\u003e\n\u003cli\u003eModified bottoming chamfer (2 to 3 threads) enables threading near the bottom of blind holes\u003c\/li\u003e\n\u003cli\u003eRight-hand thread direction, 10-24 UNC, 2BX class of fit\u003c\/li\u003e\n\u003cli\u003eNo coolant-through design; suitable for standard tapping with applied cutting fluid\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for blind hole and through-hole threading in steel materials (material application code P), including carbon, alloy, and similar steels, consistent with the Druck 1-STEEL-SN-NT application designation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThread forming taps require a properly sized forming tap drill hole, which is larger than a standard cut tap drill  -  consult the appropriate forming tap drill chart for 10-24 UNC before drilling. Power down and secure the workpiece before tool engagement. Use a suitable tapping fluid or cutting oil rated for steel to reduce friction and heat buildup. Installation should be performed by a qualified machinist following applicable shop safety and tooling procedures.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 10-24 UNC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: UNC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass of Fit\u003c\/strong\u003e: 2BX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfer\u003c\/strong\u003e: Modified Bottoming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered Threads\u003c\/strong\u003e: 2 to 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel-E (Cobalt)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Nitride\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.756 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Length\u003c\/strong\u003e: 0.591 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTapping Depth\u003c\/strong\u003e: 0.984 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.194 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Size\u003c\/strong\u003e: 0.152 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Steel (Code P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Blind Hole Threading, Through-Hole Threading\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: BU921000 (Rekord Druck-S)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrade Name\u003c\/strong\u003e: Druck 1-STEEL-SN-NT\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EMUGE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: BU921000.5007\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EMUGE","offers":[{"title":"Default Title","offer_id":52086959800626,"sku":"BU921000.5007","price":71.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9ec06454e4ffe236a26bf4a59cd6940c_45a39a82-1602-4853-91fd-e6112140d6e3.jpg?v=1790059994","url":"https:\/\/voomisupply.com\/products\/emuge-bu921000-5007-thread-forming-tap-10-24-unc-2bx","provider":"Voomi Supply","version":"1.0","type":"link"}