{"product_id":"electro-hardware-s1095-m10-f21-j-circuit-board-spacer","title":"Electro Hardware S1095-M10-F21-J Circuit Board Spacer","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ELECTRO HARDWARE S1095-M10-F21-J is a round, female unthreaded circuit board spacer machined from Grade 2 steel with a zinc-plated finish. It measures 0.75 inches overall length with a 0.375-inch outside diameter and a 0.219-inch inside diameter, sized for No. 12 screw applications. This spacer creates a fixed standoff between a circuit board and a mounting surface, maintaining consistent clearance and preventing electrical contact with enclosures or chassis. It is installed by electronics technicians, HVAC service technicians, and industrial maintenance professionals during board mounting or replacement procedures.\u003c\/p\u003e\n\u003cp\u003eThis spacer is suited for use in control boards, printed circuit board assemblies, and industrial enclosures where a precise, rigid standoff is required. The female unthreaded bore accepts a No. 12 fastener and provides a stable mounting point without the need for tapped threads. The zinc-plated finish provides corrosion resistance in light-duty indoor environments. It conforms to ASTM B633 and QQ-S-633 Type 1 finish standards, making it appropriate for applications requiring documented material and finish compliance.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFemale unthreaded round body accepts No. 12 screws for simple, tool-accessible installation\u003c\/li\u003e\n  \u003cli\u003eGrade 2 steel construction provides reliable mechanical support under typical circuit board mounting loads\u003c\/li\u003e\n  \u003cli\u003eZinc-plated finish meets ASTM B633 and QQ-S-633 Type 1 standards for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eTight length tolerance of plus or minus 0.005 inches ensures consistent board-to-chassis standoff height\u003c\/li\u003e\n  \u003cli\u003eInside diameter tolerance of 0.000 to 0.010 inches above nominal for reliable fastener fit\u003c\/li\u003e\n  \u003cli\u003eInch measurement system; compatible with standard SAE fastener tooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation spacer for circuit board assemblies requiring a No. 12 female unthreaded round standoff with a 0.75-inch overall length.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified technicians servicing control boards or electronic assemblies. Always de-energize the equipment and discharge any capacitors before handling circuit boards or mounting hardware. Use appropriately sized No. 12 fasteners and avoid over-tightening, which can crack the board substrate. Follow applicable equipment manufacturer guidelines and local electrical codes when replacing or repositioning circuit board standoffs.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.219 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter Tolerance\u003c\/strong\u003e: 0.000 to 0.010 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: -0.005 to 0.005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: No. 12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType\u003c\/strong\u003e: Female Unthreaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Shape\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel, Grade 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Zinc-Plated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFastener Standards\u003c\/strong\u003e: ASTM B633, QQ-S-633 Type 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ELECTRO HARDWARE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: S1095-M10-F21-J\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELECTRO HARDWARE","offers":[{"title":"Default Title","offer_id":51743426511154,"sku":"S1095-M10-F21-J","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/64ed36ec3a1c33caaf172ec4e8fe95b6_bbd6343b-7b75-45d0-a297-0b51dc03f223.jpg?v=1788846919","url":"https:\/\/voomisupply.com\/products\/electro-hardware-s1095-m10-f21-j-circuit-board-spacer","provider":"Voomi Supply","version":"1.0","type":"link"}