{"product_id":"electro-hardware-mp1049m19f16m3-hex-standoff-m3x0-5-nylon","title":"Electro Hardware MP1049M19F16M3 Hex Standoff M3x0.5 Nylon","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ELECTRO HARDWARE MP1049M19F16M3 is a female hex circuit board standoff designed to create precise spacing between PCBs and mounting surfaces in electronic assemblies. Machined from nylon with a plain, uncoated finish, this standoff features an M3 x 0.5 female thread, a fully threaded interior running the full 25 mm body length, and a hexagonal body with a 6 mm width across flats. At 25 mm overall length, it provides a fixed, repeatable standoff height suitable for stacked board configurations. Electronics assembly technicians and field service techs installing control boards in HVAC, electrical, and industrial equipment commonly use this hardware during panel builds and PCB replacements.\u003c\/p\u003e\n\u003cp\u003eThis standoff is suited for metric fastener applications where a nylon, non-conductive spacer is required between a circuit board and a chassis or secondary board. The MIL-P-17091B standard compliance makes it appropriate for applications where military-specification nylon hardware is specified. Typical install scenarios include control board mounting in residential and light commercial HVAC equipment, industrial control panels, and electronic enclosures where metal standoffs would create unwanted electrical conductivity or add excess weight.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM3 x 0.5 female thread, fully threaded through the full 25 mm body depth\u003c\/li\u003e\n  \u003cli\u003eNylon construction provides electrical isolation between mounted PCBs and chassis\u003c\/li\u003e\n  \u003cli\u003eHexagonal body with 6 mm width across flats allows wrench or plier installation and removal\u003c\/li\u003e\n  \u003cli\u003ePlain, uncoated bright finish  -  no coating to crack or flake in service\u003c\/li\u003e\n  \u003cli\u003eMeets MIL-P-17091B fastener standard for nylon hex standoffs\u003c\/li\u003e\n  \u003cli\u003eLength tolerance of -0.13 to 0.13 mm ensures consistent board spacing in precision assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with M3 x 0.5 metric fasteners in circuit board standoff applications where MIL-P-17091B nylon hardware is specified. Suitable for stacked PCB assemblies and control board mounting in electronic enclosures.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003ePower down and de-energize all equipment before installing or replacing circuit board standoffs. Use an appropriately sized wrench or pliers on the hex flats to seat the standoff without over-torquing the nylon body, which can crack under excessive force. Nylon hardware is not rated for high-temperature zones  -  verify the install location does not exceed the material thermal limits before use. Follow applicable electrical codes and equipment manufacturer guidelines when mounting control boards.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Female\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: M3 x 0.5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 25 mm (approximately 0.984 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Depth\u003c\/strong\u003e: 25 mm, fully threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth Across Flats\u003c\/strong\u003e: 6 mm (approximately 0.236 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Shape\u003c\/strong\u003e: Hex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nylon, Grade 101\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Plain, bright\/uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 16500 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: -0.13 to 0.13 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: MIL-P-17091B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Metric\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31161816\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ELECTRO HARDWARE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MP1049M19F16M3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELECTRO HARDWARE","offers":[{"title":"Default Title","offer_id":51741641965874,"sku":"MP1049M19F16M3","price":76.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6615e02289ce84fe730411915da9ccae_b184a8f1-822c-4f90-8d0d-0f71ec74fa7a.jpg?v=1788832682","url":"https:\/\/voomisupply.com\/products\/electro-hardware-mp1049m19f16m3-hex-standoff-m3x0-5-nylon","provider":"Voomi Supply","version":"1.0","type":"link"}