{"product_id":"electro-hardware-mp1007m19f16m4-hex-standoff-m4-nylon","title":"Electro Hardware MP1007M19F16M4 Hex Standoff M4 Nylon","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ELECTRO HARDWARE MP1007M19F16M4 is a female hex circuit board standoff designed to create fixed spacing between PCBs and chassis surfaces in electronic assemblies. Made from nylon with a plain, uncoated finish, this standoff is fully threaded to an M4 x 0.7 thread specification with a 4 mm thread depth. The hex body measures 6 mm across flats, allowing installation and removal with standard hex tooling. At 4 mm overall length, it is suited for low-profile stacking applications where minimal board separation is required. Meets MIL-P-17091B fastener standards, making it appropriate for defense and industrial-grade electronic assemblies.\u003c\/p\u003e\n\u003cp\u003eThis standoff is used in PCB mounting applications across commercial and industrial electronics, control panels, HVAC control boards, and similar assemblies requiring non-conductive spacing hardware. The nylon construction provides electrical isolation between the board and mounting surface, which is critical in applications where metal hardware would create an unintended ground path or risk shorting components. Electronics technicians, panel builders, and field service techs working with control boards will encounter this type of hardware during board replacement or enclosure assembly work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFully threaded female hex standoff, M4 x 0.7 thread size\u003c\/li\u003e\n  \u003cli\u003eNylon construction provides electrical isolation and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e4 mm overall length with full 4 mm thread depth\u003c\/li\u003e\n  \u003cli\u003e6 mm hex body width accepts standard hex drivers and wrenches\u003c\/li\u003e\n  \u003cli\u003ePlain, uncoated finish rated to 16,500 psi tensile strength\u003c\/li\u003e\n  \u003cli\u003eMeets MIL-P-17091B fastener standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in any PCB or chassis assembly requiring M4 x 0.7 female threaded standoffs with a 4 mm hex body height and non-conductive nylon construction.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by hand or with a hex wrench sized to the 6 mm across-flats body. Avoid overtightening — nylon hardware does not tolerate the same torque loads as metal fasteners and can crack or strip under excessive force. Ensure mating male fasteners match the M4 x 0.7 thread specification before assembly. Minimum order quantity for this part is 5 units.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Female\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: M4 x 0.7\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Depth\u003c\/strong\u003e: 4 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 mm (approximately 0.157 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Shape\u003c\/strong\u003e: Hex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth Across Flats\u003c\/strong\u003e: 6 mm (approximately 0.236 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Nylon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: 101\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Plain, Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 16,500 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: -0.13 mm to +0.13 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFastener Standard\u003c\/strong\u003e: MIL-P-17091B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Metric\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0001 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ELECTRO HARDWARE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: MP1007M19F16M4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELECTRO HARDWARE","offers":[{"title":"Default Title","offer_id":51730154422578,"sku":"MP1007M19F16M4","price":17.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6615e02289ce84fe730411915da9ccae_184dcf26-48ec-4237-bc3f-5bfdedea698d.jpg?v=1788712683","url":"https:\/\/voomisupply.com\/products\/electro-hardware-mp1007m19f16m4-hex-standoff-m4-nylon","provider":"Voomi Supply","version":"1.0","type":"link"}