{"product_id":"eaton-210292-4s-steel-flared-tube-cap-1-4-in-37-deg","title":"Eaton 210292-4S Steel Flared Tube Cap 1\/4 in 37 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EATON 210292-4S is a steel flared tube cap designed to terminate or seal a 1\/4-inch OD flared tube end in hydraulic, pneumatic, and fluid-system lines. The cap seats on a 37-degree flare and threads onto a 7\/16-20 SAE fitting, providing a secure, leak-resistant closure. It is rated for working pressures up to 4500 psi and handles temperatures from -40 degrees F to 250 degrees F, making it suitable for demanding service environments. Plumbers, hydraulic technicians, and mechanical contractors install this fitting as a dead-end cap during system assembly, testing, or line isolation.\u003c\/p\u003e\n\u003cp\u003eThis cap fits standard SAE 37-degree flare tube connections with a 7\/16-20 thread and a 1\/4-inch tube OD. It is commonly used in hydraulic systems, refrigeration lines, fuel systems, and industrial fluid circuits where a temporary or permanent cap is needed on an open flare fitting. The steel construction holds up under high-pressure cycling and wide temperature swings typical of mobile equipment and stationary industrial systems.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel construction for high-strength, high-pressure service up to 4500 psi\u003c\/li\u003e\n  \u003cli\u003e37-degree SAE flare seat matches standard JIC and AN flare fittings\u003c\/li\u003e\n  \u003cli\u003e7\/16-20 SAE thread for positive, leak-resistant engagement\u003c\/li\u003e\n  \u003cli\u003eWide temperature range: -40 degrees F to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003eCompact profile at 0.59 inches overall length for tight installation spaces\u003c\/li\u003e\n  \u003cli\u003eMeets SAE 070112 standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with SAE 37-degree flare tube connections using a 1\/4-inch tube OD and 7\/16-20 thread, conforming to SAE 070112 standard fitment requirements.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed plumber, hydraulic technician, or mechanical contractor. Depressurize and isolate the line completely before removing any existing fitting or installing this cap. Thread the cap onto the flare fitting by hand first to confirm proper thread engagement, then tighten with an appropriate open-end wrench. Do not overtighten, as steel-on-steel flare seats can be damaged by excessive torque.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Cap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 7\/16-20\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: SAE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube OD\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.59 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 4500 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE 070112\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27121707\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EATON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 210292-4S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EATON","offers":[{"title":"Default Title","offer_id":51539043582258,"sku":"210292-4S","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d75107720a20c13d526a74eff5b367df.jpg?v=1785833627","url":"https:\/\/voomisupply.com\/products\/eaton-210292-4s-steel-flared-tube-cap-1-4-in-37-deg","provider":"Voomi Supply","version":"1.0","type":"link"}