{"product_id":"eaton-2070-6-6s-steel-45-deg-swivel-nut-elbow-3-8-in-od","title":"Eaton 2070-6-6S Steel 45 Deg Swivel Nut Elbow 3\/8 in Od","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EATON 2070-6-6S is a steel 45-degree swivel nut elbow fitting designed for flared tube connections in hydraulic and fluid power plumbing systems. It features a flare-by-swivel end configuration with a 37-degree flare angle and a 9\/16-18 SAE thread. The fitting has a 3\/8-inch tube outside diameter and a 0.40-inch inside diameter, with an overall length of 1.57 inches. Rated to 4000 psi maximum working pressure, it handles temperatures from -65 degrees F to 400 degrees F. Licensed HVAC technicians, plumbers, and fluid power mechanics install this type of fitting in compressed air, refrigeration, and hydraulic line assemblies.\u003c\/p\u003e\u003cp\u003eThis fitting is suited for residential and commercial fluid system installations where a 45-degree directional change in a flared tube line is required. The swivel nut design allows the fitting body to be positioned and the nut to be tightened independently, simplifying alignment in tight spaces. Typical applications include hydraulic control circuits, pneumatic distribution lines, and refrigerant piping where SAE flare connections are specified. Its steel construction and 4000 psi pressure rating make it appropriate for moderate- to high-pressure service lines.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e45-degree elbow geometry with 37-degree SAE flare angle for directional routing in confined installations\u003c\/li\u003e\n\u003cli\u003eSwivel nut end allows independent rotation during installation, reducing torque transfer to tubing\u003c\/li\u003e\n\u003cli\u003e4000 psi maximum working pressure rating for moderate- to high-pressure fluid systems\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -65 degrees F to 400 degrees F covers a wide range of service conditions\u003c\/li\u003e\n\u003cli\u003eSteel construction provides strength and durability in hydraulic and pneumatic applications\u003c\/li\u003e\n\u003cli\u003eMeets SAE 070321 standard for dimensional and performance compliance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or new-installation flare fitting for fluid power, hydraulic, and pneumatic systems requiring a 3\/8-inch OD tube connection with a 9\/16-18 SAE thread and 37-degree flare angle.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified plumber, hydraulic technician, or HVAC mechanic familiar with SAE flare fittings and applicable system codes. Depressurize and isolate the fluid circuit completely before removing or installing any fitting. Inspect the tube flare for cracks or deformation before assembly, as a compromised flare seat will cause leaks under pressure. Do not over-tighten the swivel nut; follow applicable SAE assembly guidelines for flare-type fittings.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 4000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -65 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.40 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.57 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 9\/16-18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: SAE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlare Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: 45-Degree Swivel Nut Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x Swivel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.09 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE 070321\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EATON\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2070-6-6S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EATON","offers":[{"title":"Default Title","offer_id":51540583678258,"sku":"2070-6-6S","price":17.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7e580481a8681f705d6a340799472918.jpg?v=1785859101","url":"https:\/\/voomisupply.com\/products\/eaton-2070-6-6s-steel-45-deg-swivel-nut-elbow-3-8-in-od","provider":"Voomi Supply","version":"1.0","type":"link"}