{"product_id":"eaton-2024-8-6s-steel-flared-tube-male-elbow-3-8-in-od","title":"Eaton 2024-8-6S Steel Flared Tube Male Elbow 3\/8 in Od","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe EATON 2024-8-6S is a 90-degree male elbow fitting designed for flared tube connections in high-pressure fluid and gas line applications. It features a 3\/8-inch tube outside diameter and a 1\/2-inch male NPT thread on the run end, with a 37-degree flare seat conforming to SAE standard 070202. The fitting is machined from steel for durability under pressure, rated to a maximum working pressure of 8000 psi. It is installed by licensed plumbers, pipefitters, and HVAC technicians working on hydraulic, pneumatic, or refrigerant-adjacent hard-line systems where a direction change from tube to threaded pipe is required.\u003c\/p\u003e\u003cp\u003eThis fitting is suited for residential and commercial applications where steel flare-to-NPT transitions are needed. It accommodates tube with a 3\/8-inch OD and mates to 1\/2-inch NPT female ports on valves, manifolds, or other components. The 90-degree elbow geometry is used when routing lines around obstructions or changing direction in tight equipment enclosures. The wide operating temperature range of -65 degrees F to 400 degrees F makes it compatible with both refrigeration and high-temperature fluid service.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e90-degree elbow orientation with Flare x MNPT end connections for direction changes in tube runs\u003c\/li\u003e\n\u003cli\u003e37-degree flare seat per SAE 070202 for a pressure-rated, leak-resistant seal\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure of 8000 psi for demanding hydraulic and pneumatic service\u003c\/li\u003e\n\u003cli\u003eOperating temperature range of -65 degrees F to 400 degrees F\u003c\/li\u003e\n\u003cli\u003eSteel construction for strength and compatibility with a wide range of fluid media\u003c\/li\u003e\n\u003cli\u003e3\/8-inch tube OD inlet with 1\/2-inch MNPT outlet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with 3\/8-inch OD flared tubing and 1\/2-inch NPT female-ported components in steel hard-line plumbing, hydraulic, and HVAC applications conforming to SAE 070202.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified pipefitter, plumber, or HVAC technician. Depressurize and isolate the line completely before disassembling any fitting. Apply thread sealant appropriate for the media and pressure rating to the NPT threads; do not apply sealant to the flare seat. Ensure the mating tube end is properly flared to 37 degrees before tightening to avoid leaks or seat damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: 90-Degree Male Elbow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x MNPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube Outside Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.301 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.905 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 8000 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -65 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: SAE 070202\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EATON\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2024-8-6S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EATON","offers":[{"title":"Default Title","offer_id":51540434026802,"sku":"2024-8-6S","price":18.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ce62ccbb0616f388ce36e58544ec723a.jpg?v=1785855016","url":"https:\/\/voomisupply.com\/products\/eaton-2024-8-6s-steel-flared-tube-male-elbow-3-8-in-od","provider":"Voomi Supply","version":"1.0","type":"link"}