{"product_id":"eaton-2024-8-10s-steel-flared-tube-male-elbow-5-8-in-od","title":"Eaton 2024-8-10S Steel Flared Tube Male Elbow 5\/8 in Od","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EATON 2024-8-10S is a 90-degree male elbow fitting designed for flared tube connections in hydraulic, pneumatic, and fluid-transfer applications. It features a 5\/8 inch tube OD flare inlet and a 1\/2 inch MNPT outlet, with a standard 37-degree flare angle conforming to SAE 070202. Constructed from steel, this fitting delivers reliable mechanical strength across a wide operating temperature range of -65 degrees F to 400 degrees F. Licensed plumbers, pipefitters, and fluid-system technicians install this fitting where a directional change from tube to threaded pipe is required in a compact run.\u003c\/p\u003e\n\u003cp\u003eThis elbow is suited for residential and commercial fluid-system installations where a 90-degree directional change is needed between a flared steel tube and an NPT-threaded port or pipe. Typical applications include HVAC refrigerant lines, hydraulic equipment plumbing, and industrial fluid conveyance systems. The Flare x MNPT end configuration allows direct connection between a flared tube assembly and a standard NPT-threaded fitting, valve, or manifold. With an overall length of 1.714 inches and an inside diameter of 0.866 inches, the fitting is compact enough for tight-space installations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e90-degree male elbow geometry for directional tube-to-pipe routing changes\u003c\/li\u003e\n  \u003cli\u003e37-degree flare angle per SAE 070202 standard\u003c\/li\u003e\n  \u003cli\u003eSteel construction for durability in high-pressure and wide-temperature-range service\u003c\/li\u003e\n  \u003cli\u003eFlare x MNPT end connections for direct interface between flared tube and NPT-threaded components\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -65 degrees F to 400 degrees F\u003c\/li\u003e\n  \u003cli\u003eCompact overall length of 1.714 inches for use in space-constrained installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or service fitting for fluid systems requiring a 5\/8 inch OD flared tube connection to a 1\/2 inch MNPT port, conforming to SAE 070202 specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified pipefitter, plumber, or HVAC technician familiar with flared tube fittings and NPT thread connections. Depressurize and drain the system completely before removing or installing any fitting. Apply appropriate thread sealant to the MNPT threads per the fluid-system requirements and applicable codes such as the IPC or IFGC. Do not over-tighten the flare connection, as over-torquing can damage the flare seat and cause leaks.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: 90 Degree Male Elbow\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x MNPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlare Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTube OD\u003c\/strong\u003e: 5\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.866 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.714 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -65 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 400 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE 070202\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27121707\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EATON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2024-8-10S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EATON","offers":[{"title":"Default Title","offer_id":51539065110834,"sku":"2024-8-10S","price":21.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2cd7f5f5b936c3d76e64a72de844518f.jpg?v=1785834148","url":"https:\/\/voomisupply.com\/products\/eaton-2024-8-10s-steel-flared-tube-male-elbow-5-8-in-od","provider":"Voomi Supply","version":"1.0","type":"link"}