{"product_id":"eaton-2018-8-10s-female-jic-37-to-male-npt-adapter-5-8-in","title":"Eaton 2018-8-10S Female Jic 37 to Male Npt Adapter 5\/8 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EATON 2018-8-10S is a steel flared tube adapter that connects a female JIC 37-degree swivel end to a male NPT pipe thread. It is used in hydraulic and fluid-power plumbing lines where a flared tube fitting must transition to a standard pipe thread port. The swivel design on the JIC end allows the fitting to rotate during installation, reducing tube twist and making alignment easier in tight spaces. Rated for service from -40 degrees F to 250 degrees F and conforming to SAE J514, this adapter suits hydraulic, pneumatic, and fluid-transfer systems. It weighs 0.23 pounds and measures 2.12 inches in overall length. Installation is performed by licensed pipefitters, hydraulic technicians, or qualified mechanical tradespeople.\u003c\/p\u003e\n\u003cp\u003eThis adapter is appropriate for residential, commercial, and industrial fluid-power applications wherever a 5\/8-inch OD flared tube line must connect to a 1\/2-inch NPT male pipe port. Typical install scenarios include hydraulic manifolds, power-unit plumbing, lubrication systems, and compressed-air distribution lines. The NPTF-compatible thread seals under pressure without relying solely on thread sealant, though thread compound or PTFE tape is standard practice. The fitting is sold individually and is stocked as a single-piece unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFemale JIC 37-degree swivel inlet accepts 5\/8-inch OD flared tube\u003c\/li\u003e\n  \u003cli\u003eMale NPT outlet threads directly into standard pipe ports\u003c\/li\u003e\n  \u003cli\u003eSwivel end reduces tube twist during tightening\u003c\/li\u003e\n  \u003cli\u003eRated from -40 degrees F to 250 degrees F\u003c\/li\u003e\n  \u003cli\u003eConforms to SAE J514 flared-tube fitting standard\u003c\/li\u003e\n  \u003cli\u003eSteel construction for durability in hydraulic and fluid-transfer service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard SAE J514-compliant adapter for hydraulic and fluid-power systems using 5\/8-inch OD flared tube lines with a 1\/2-inch NPT male pipe connection port.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eShut down system pressure and depressurize all lines before removing or installing any hydraulic fitting. Apply thread sealant or PTFE tape to the male NPT threads in accordance with system requirements and applicable codes. Tighten the NPT end to the port first, then snug the JIC swivel nut against the flared tube seat — do not overtighten the flare seat, as this can damage the sealing surface. Work performed on pressurized fluid systems should conform to relevant industry and facility safety standards.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Flare x NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlared Angle\u003c\/strong\u003e: 37 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/2 NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.23 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: SAE J514\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27121707\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EATON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2018-8-10S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EATON","offers":[{"title":"Default Title","offer_id":51540126236978,"sku":"2018-8-10S","price":38.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/19f05febcefefcff50968633c544fd85.jpg?v=1785846392","url":"https:\/\/voomisupply.com\/products\/eaton-2018-8-10s-female-jic-37-to-male-npt-adapter-5-8-in","provider":"Voomi Supply","version":"1.0","type":"link"}