{"product_id":"eaton-10006b-104-barbed-hose-male-connector-3-8in-brass","title":"Eaton 10006B-104 Barbed Hose Male Connector 3\/8in Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EATON 10006B-104 is a barbed push-on hose male connector designed for use in fluid and pneumatic line assemblies where a secure, leak-resistant connection between a hose and a threaded port is required. Constructed entirely from brass, this fitting features a 3\/8 inch barb on one end and a 1\/4-18 NPT male thread on the other. It is rated for a maximum working pressure of 9500 psi, making it suitable for demanding hydraulic and high-pressure plumbing applications. The overall length is 1.65 inches, and the 9\/16 inch hex allows for standard wrench installation. Plumbers, pipefitters, and hydraulic technicians are the primary installers of this type of fitting.\u003c\/p\u003e\n\u003cp\u003eThis connector is used in residential and commercial plumbing, hydraulic systems, and fluid transfer lines where a barbed hose must terminate at a threaded male NPT port. The 1\/4-18 NPT thread conforms to standard tapered pipe thread specifications, ensuring compatibility with NPT-threaded ports and fittings found across a wide range of equipment. The 3\/8 inch barb accepts correspondingly sized push-on or clamp-secured hose. The 7\/8 inch cut-off allowance provides the installer with a clean reference point for trimming hose to the correct seating depth.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass construction for corrosion resistance and long service life in wet environments\u003c\/li\u003e\n  \u003cli\u003e3\/8 inch barb for push-on or clamp-secured hose attachment\u003c\/li\u003e\n  \u003cli\u003e1\/4-18 NPT male thread for standard tapered pipe thread connections\u003c\/li\u003e\n  \u003cli\u003eRated to 9500 psi maximum working pressure\u003c\/li\u003e\n  \u003cli\u003e9\/16 inch hex for wrench tightening during installation\u003c\/li\u003e\n  \u003cli\u003e7\/8 inch cut-off allowance aids proper hose seating depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-install fitting for systems using 3\/8 inch barbed hose connections with 1\/4-18 NPT male threaded ports in hydraulic, plumbing, and fluid transfer applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber, pipefitter, or hydraulic technician familiar with NPT threaded fittings and hose assembly procedures. Shut off and depressurize the system completely before removing or installing any fittings. Apply appropriate thread sealant or PTFE tape to the NPT threads in accordance with local plumbing codes before making up the joint. Do not overtighten the fitting; use the 9\/16 inch hex and a calibrated wrench to snug the connection without stressing the brass body.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Male\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBarb Size\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/4-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 9500 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1.65 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHex Size\u003c\/strong\u003e: 9\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut-Off Allowance\u003c\/strong\u003e: 7\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 40141734\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EATON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 10006B-104\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EATON","offers":[{"title":"Default Title","offer_id":51540510900530,"sku":"10006B-104","price":15.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/efa27ea21f5439b0c8d8bfbc02895757.jpg?v=1785856986","url":"https:\/\/voomisupply.com\/products\/eaton-10006b-104-barbed-hose-male-connector-3-8in-brass","provider":"Voomi Supply","version":"1.0","type":"link"}