{"product_id":"eaton-05704b-102-barbed-hose-fitting-1-8-nptf-brass","title":"Eaton 05704B-102 Barbed Hose Fitting 1\/8 Nptf Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe EATON 05704B-102 is a male rigid barbed hose fitting machined from brass, designed to connect 1\/4 inch inside diameter hose to a 1\/8 inch NPTF threaded port. The barbed end creates a secure mechanical grip on the hose, while the threaded male end seals into a female NPTF port. At 1.06 inches overall length with a 0.44 inch hex head, this compact fitting is well suited for tight installations. Plumbers, HVAC technicians, and fluid-system assemblers use fittings like this in low-pressure fluid and pneumatic lines where a reliable, leak-resistant threaded-to-hose transition is required.\u003c\/p\u003e\n\u003cp\u003eThis fitting is appropriate for residential and light commercial applications involving 1\/4 inch ID flexible hose routed to threaded equipment ports. Typical use cases include condensate drain lines, water supply branches, pneumatic control tubing, and similar low-pressure service lines. The NPTF thread form provides a dry-seal connection that reduces reliance on additional thread sealant, though most installers apply PTFE tape or pipe sealant per job requirements and applicable codes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass construction resists corrosion in water, air, and mild fluid service\u003c\/li\u003e\n  \u003cli\u003e1\/8 inch NPTF male thread for dry-seal threaded port connections\u003c\/li\u003e\n  \u003cli\u003eBarbed end sized for 1\/4 inch inside diameter hose\u003c\/li\u003e\n  \u003cli\u003e0.44 inch hex head allows standard wrench installation\u003c\/li\u003e\n  \u003cli\u003eCompact 1.06 inch overall length suits confined spaces\u003c\/li\u003e\n  \u003cli\u003eMale rigid configuration — no swivel; orient hose run before tightening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or service fitting for any system using 1\/4 inch ID flexible hose terminating at a 1\/8 inch NPTF female threaded port.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a licensed plumber or HVAC technician. Depressurize and drain the line before removing or installing any fitting. Apply PTFE tape or an approved pipe thread sealant to the male NPTF threads before assembly. Because this is a male rigid fitting, route and position the hose before final tightening to avoid twisting or stressing the hose.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: NPTF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Male Fitting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHose Inside Diameter\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBarb Size\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHex Head Size\u003c\/strong\u003e: 0.44 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.06 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: EATON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 05704B-102\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EATON","offers":[{"title":"Default Title","offer_id":51541575794994,"sku":"05704B-102","price":38.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/dcb73da675024b9709c04ce7d5d1ce25.jpg?v=1785879630","url":"https:\/\/voomisupply.com\/products\/eaton-05704b-102-barbed-hose-fitting-1-8-nptf-brass","provider":"Voomi Supply","version":"1.0","type":"link"}