{"product_id":"drill-rod-tool-steels-86234101-a2-tool-steel-flat-stock","title":"Drill Rod Tool Steels 86234101 A2 Tool Steel Flat Stock","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 86234101 is an A2 air-hardening tool steel flat stock bar used in toolmaking, die work, and precision machining applications. It measures 0.875 inches thick, 1 inch wide, and 18 inches long, and weighs approximately 4.46 pounds. A2 tool steel is known for its dimensional stability during air hardening, making it a reliable choice for punches, dies, gauges, and cutting tools. Machinists, tool and die makers, and metalworking fabricators work with this material when tight tolerances and consistent hardening response are required.\u003c\/p\u003e\u003cp\u003eThis flat stock is suited for job shops, tool rooms, and manufacturing facilities producing tooling components. The 18-inch length makes it practical for short-run tooling blanks or stock that will be cut to size. Its ground and precision-milled tolerances allow for close-tolerance work without extensive stock removal prior to heat treatment. It is appropriate for both prototype and production tooling where air-hardening steel performance is specified.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA2 air-hardening tool steel for dimensional stability during heat treatment\u003c\/li\u003e\n\u003cli\u003eThickness: 0.875 inches with a tolerance of plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003eWidth: 1 inch with a tolerance of plus 0.000 to minus 0.005 inches\u003c\/li\u003e\n\u003cli\u003eLength: 18 inches with a tolerance of plus or minus 0.062 inches\u003c\/li\u003e\n\u003cli\u003eSquare tolerance held to plus or minus 0.003 inches\u003c\/li\u003e\n\u003cli\u003eReady-to-use flat stock format for tooling blanks and die components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard A2 tool steel flat stock blank suitable for tool and die fabrication, punch and die sets, gauging components, and precision machining applications requiring an air-hardening steel per AISI A2 specification.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eCutting, grinding, and machining of tool steel flat stock should be performed by qualified machinists or tool and die makers using appropriate tooling rated for hardened or semi-hardened steel. Follow all applicable shop safety practices when sawing or grinding this material. Heat treatment should be performed by a qualified heat treater following the recommended cycle for AISI A2 tool steel. Always verify dimensional tolerances before and after any thermal processing.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI A2 Air-Hardening Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.000 to minus 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus or minus 0.062 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 4.46 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 86234101\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":52123789197618,"sku":"86234101","price":74.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_022ed794-d82e-4cf1-9447-5ef871f06161.jpg?v=1790086366","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-86234101-a2-tool-steel-flat-stock","provider":"Voomi Supply","version":"1.0","type":"link"}