{"product_id":"drill-rod-tool-steels-85997849-a2-tool-steel-flat-stock","title":"Drill Rod Tool Steels 85997849 A2 Tool Steel Flat Stock","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 85997849 is an A2 air-hardening tool steel flat stock bar sized at 3\/32 inches thick, 1-1\/4 inches wide, and 18 inches long. A2 tool steel is an air-hardening, cold-work die steel known for its dimensional stability during heat treatment, good wear resistance, and moderate toughness. This flat stock ships in a pre-hardened-ready, ground condition and is intended for use by machinists, toolmakers, and die makers who need tight-tolerance stock for fabricating cutting tools, dies, punches, gauges, and fixtures. The piece weighs 0.61 pounds and is produced to AISI Type A2 material specification.\u003c\/p\u003e\u003cp\u003eA2 air-hardening flat stock is a standard material in tool and die shops, machine shops, and industrial maintenance environments. It is well suited for applications where distortion-free hardening is required, such as blanking dies, forming dies, trim dies, and precision punches. The 18-inch length and 3\/32-inch thickness make this bar appropriate for small-scale tooling components and prototype work. Toolmakers and machinists working in both production and job-shop settings commonly stock A2 flat bar in multiple sizes for on-demand fabrication.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type A2 air-hardening tool steel for minimal distortion during heat treatment\u003c\/li\u003e\n\u003cli\u003eThickness tolerance of plus or minus 0.001 inches for tight dimensional control\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of plus 0.000 to minus 0.005 inches\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus or minus 0.062 inches\u003c\/li\u003e\n\u003cli\u003eSquareness tolerance of 0.003 inches on edges and 0.004 inches per inch of thickness on ends\u003c\/li\u003e\n\u003cli\u003eSingle-piece minimum order quantity  -  no bulk commitment required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard AISI A2 air-hardening tool steel flat stock suitable for general tool and die fabrication, punch and die sets, gauges, and precision fixtures requiring dimensional stability through the hardening process.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eCutting, grinding, and drilling of A2 tool steel should be performed by qualified machinists or toolmakers using appropriate metalworking equipment. Heat treatment  -  including austenitizing, air quenching, and tempering  -  should follow the material manufacturer's published thermal processing guidelines and be performed by personnel trained in tool steel heat treatment. Always wear appropriate PPE when machining or grinding tool steel. Follow applicable shop safety codes and procedures when handling sharp-edged flat stock.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type A2 Air-Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.000 to minus 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus or minus 0.062 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge 0.003 inches and Ends 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.61 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 85997849\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":52090572276018,"sku":"85997849","price":52.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_152e9d39-9ab9-4e09-9466-7d500bf0c21b.jpg?v=1790062586","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-85997849-a2-tool-steel-flat-stock","provider":"Voomi Supply","version":"1.0","type":"link"}