{"product_id":"drill-rod-tool-steels-66819-o1-tool-steel-flat-stock","title":"Drill Rod Tool Steels 66819 O1 Tool Steel Flat Stock","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 66819 is an O1 oil-hardening tool steel flat bar cut to 3\/16 inch thick, 1-1\/2 inches wide, and 36 inches long. O1 is an oil-hardening, cold-work tool steel known for good wear resistance, moderate toughness, and machinability in the annealed state. This flat stock ships in its annealed condition, ready for machining, grinding, and layout work before heat treatment. Machinists, toolmakers, and die makers use this material to fabricate punches, dies, gauges, jigs, fixtures, and cutting tools. At 2.9 pounds per piece, it is a practical bench-stock size for a wide range of toolroom applications.\u003c\/p\u003e\u003cp\u003eThis flat stock is suited for small-to-medium toolroom and production shop use. Typical applications include fabricating blanking and forming dies, drill jigs, milling fixtures, straightedges, and scribers. The 36-inch length allows multiple blanks to be cut from a single piece. Machinists working in tool and die, mold making, or general precision machining will find this a standard working size. It is appropriate for both prototype and short-run production tooling where oil-hardening steel is specified.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel, annealed for easy machining before hardening\u003c\/li\u003e\n\u003cli\u003eThickness tolerance of plus or minus 0.001 inches for precise fit in close-tolerance applications\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of plus 0.005 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.5 inches from nominal 36 inches\u003c\/li\u003e\n\u003cli\u003eSquareness held to 0.003 inches on edges and 0.004 inches per inch of thickness on ends\u003c\/li\u003e\n\u003cli\u003eSingle-piece minimum order quantity suits small-shop and toolroom procurement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard AISI O1 oil-hardening tool steel flat bar suitable for general toolroom fabrication wherever O1 specification material is required.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eMachining and grinding should be completed in the annealed state before heat treatment. Oil hardening requires controlled quench in warm oil followed by an immediate temper cycle  -  this work should be performed by qualified toolmakers or heat treatment professionals following established metallurgical procedures. Always wear appropriate PPE when cutting, grinding, or heat treating tool steel. Deburr all edges after sawing or shearing to prevent handling injuries and to maintain dimensional accuracy during layout.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.005 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge 0.003 inches; End 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.9 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 66819\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":52056583373106,"sku":"66819","price":91.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_2bfddb15-e98c-418f-b8b2-8f771ab72b3a.jpg?v=1790038304","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-66819-o1-tool-steel-flat-stock","provider":"Voomi Supply","version":"1.0","type":"link"}