{"product_id":"drill-rod-tool-steels-66818-o1-tool-steel-flat-stock","title":"Drill Rod Tool Steels 66818 O1 Tool Steel Flat Stock","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 66818 is an O1 oil-hardening tool steel flat bar cut to 3\/16 inches thick, 1-1\/4 inches wide, and 36 inches long. Conforming to AISI Type O1 material specification, this flat stock is used by machinists, toolmakers, and fabricators who need a pre-dimensioned blank that can be ground, machined, and then oil-hardened to a working tool edge. Thickness tolerance holds to plus or minus 0.001 inches, making it suitable for close-tolerance tooling applications where consistent stock removal is required before heat treatment. The piece weighs approximately 2.42 pounds.\u003c\/p\u003e\u003cp\u003eO1 tool steel flat stock in this size range is commonly used in job shops, tool and die operations, and maintenance machining environments. Typical applications include punches, dies, jigs, fixtures, gauges, and general tooling blanks where the part will be finish-ground and hardened after shaping. This stock is supplied in the annealed condition, ready for machining prior to hardening.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel  -  machines well in annealed condition and responds consistently to oil-quench hardening\u003c\/li\u003e\n\u003cli\u003eThickness: 3\/16 inches with plus or minus 0.001 inches tolerance\u003c\/li\u003e\n\u003cli\u003eWidth: 1-1\/4 inches with plus 0.005 inches, minus 0.000 inches tolerance\u003c\/li\u003e\n\u003cli\u003eLength: 36 inches with plus 0.5 inches tolerance\u003c\/li\u003e\n\u003cli\u003eSquareness: edge 0.003 inches, end 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003cli\u003ePre-cut flat bar format reduces material prep time before machining\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard O1 oil-hardening tool steel flat bar suitable for general tooling, die, and fixture fabrication applications requiring a readily machinable and hardenable stock material.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eHandling and cutting of tool steel flat stock should be performed using appropriate metalworking equipment; standard mill and surface grinder setups are typical for sizing and finishing. Material is supplied annealed  -  oil hardening and tempering should be performed by a qualified heat treater or experienced machinist following established metallurgical procedures for AISI O1 tool steel. Use proper personal protective equipment when sawing, grinding, or handling sharp-edged stock.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.005 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge 0.003 inches; End 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.42 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 66818\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":52039428702514,"sku":"66818","price":84.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_79e3e6cc-cf9f-4976-8dc8-e315395ecb42.jpg?v=1790026186","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-66818-o1-tool-steel-flat-stock","provider":"Voomi Supply","version":"1.0","type":"link"}