{"product_id":"drill-rod-tool-steels-66714-o1-flat-stock-1-32x1x18-in","title":"Drill Rod Tool Steels 66714 O1 Flat Stock 1\/32x1x18 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 66714 is an O1 oil-hardening tool steel flat bar cut to 1\/32 inch thick, 1 inch wide, and 18 inches long. O1 is a general-purpose tool steel known for excellent machinability in the annealed state and good edge retention after oil hardening. This flat stock ships in its soft, pre-hardened condition, allowing machinists and toolmakers to cut, grind, and shape it before heat treatment. Thickness tolerance is held to plus or minus 0.001 inches, width tolerance to plus 0.005 inches and minus 0.000 inches, and length tolerance to plus 0.25 inches. The piece weighs 0.16 pounds.\u003c\/p\u003e\u003cp\u003eThis flat stock is used in tool rooms, machine shops, and fabrication environments where close-tolerance blanks are needed for punches, dies, gauges, blades, and similar tooling. Its thin 1\/32-inch section makes it well suited for shim stock, small die plates, and precision cutting tools where the oil-hardening process is preferred over water or air hardening for reduced distortion risk during heat treat.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel for controlled heat-treat response and minimal distortion\u003c\/li\u003e\n\u003cli\u003eThickness tolerance held to plus or minus 0.001 inches for precision fitment\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of plus 0.005 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003eSquareness: edge 0.003 inches, end 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003cli\u003eAnnealed condition allows conventional machining and grinding before hardening\u003c\/li\u003e\n\u003cli\u003eSold as individual flat bar pieces with no minimum order beyond one unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard AISI Type O1 oil-hardening tool steel flat blank suitable for general toolroom and die-shop applications requiring a 1\/32-inch-thick section.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eCutting, grinding, and EDM operations should be completed before oil-hardening heat treatment. Heat treatment of O1 tool steel should be performed by a qualified heat treater following established metallurgical procedures for austenitizing temperature, quench medium, and temper cycle. Appropriate personal protective equipment is required during all grinding and heat-treat operations. Deburr all edges after cutting to prevent handling injury and measurement error.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 1\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.005 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge 0.003 inches, End 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 66714\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":51982178943282,"sku":"66714","price":47.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_069e7656-c35a-4a1f-a217-44b901368bf6.jpg?v=1789982913","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-66714-o1-flat-stock-1-32x1x18-in","provider":"Voomi Supply","version":"1.0","type":"link"}