{"product_id":"drill-rod-tool-steels-57921-o1-tool-steel-flat-stock","title":"Drill Rod Tool Steels 57921 O1 Tool Steel Flat Stock","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 57921 is an O1 oil-hardening tool steel flat bar cut to 5\/16 inches thick, 2 inches wide, and 36 inches long. O1 is a general-purpose tool steel prized for its predictable oil-quench hardening response, good dimensional stability after heat treatment, and strong machinability in the annealed state. This flat stock ships in the soft, annealed condition, ready for machining to final geometry before hardening. Machinists, toolmakers, and die-shop technicians use it to fabricate punches, dies, gauges, jigs, and cutting tools where tight tolerances and reliable through-hardening are required.\u003c\/p\u003e\u003cp\u003eThis flat stock is suited to tool-and-die shops, machine shops, and maintenance departments that need a readily machinable, oil-hardening steel blank. At 36 inches in length, a single bar provides enough material for multiple short tooling components or one full-length guide rail or die shoe component. The annealed condition allows conventional milling, drilling, turning, and grinding before the oil-quench hardening cycle. It is a practical choice for one-off tooling, short-run production fixtures, and replacement die components across a wide range of industrial fabrication applications.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel in annealed flat bar form\u003c\/li\u003e\n\u003cli\u003eThickness tolerance of plus or minus 0.001 inches for precise blank sizing\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of plus 0.005 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.5 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003eSquareness: edge 0.003 inches per inch of thickness, end 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003cli\u003eWeighs 6.45 pounds per bar, suitable for single-piece handling and sawing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard AISI Type O1 oil-hardening tool steel flat blank for toolmaking, die-making, and general machining applications requiring oil-quench hardenable steel stock.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eCutting, grinding, and machining should be performed by qualified machinists or toolmakers using appropriate personal protective equipment. The bar ships annealed; heat treatment, including oil quenching and tempering, should follow established metallurgical procedures and be performed by personnel familiar with tool steel processing. Secure the bar firmly in a vise or fixture before sawing or milling to prevent movement. Allow the workpiece to cool fully before measuring to verify dimensional compliance against the stated tolerances.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 5\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.005 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.5 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge 0.003 inches per inch of thickness, End 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 6.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 57921\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":51962481836338,"sku":"57921","price":169.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_a0a4179b-d8b9-46d2-9ea5-c6874e1ac709.jpg?v=1789947730","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-57921-o1-tool-steel-flat-stock","provider":"Voomi Supply","version":"1.0","type":"link"}