{"product_id":"drill-rod-tool-steels-57915-o1-tool-steel-flat-stock","title":"Drill Rod Tool Steels 57915 O1 Tool Steel Flat Stock","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 57915 is an O1 oil-hardening tool steel flat bar, cut to 0.25 inches thick, 7 inches wide, and 36 inches long. O1 is a general-purpose tool steel prized for its ease of machining in the annealed state and its ability to hold a fine edge after hardening. This flat stock is supplied to tight dimensional tolerances, making it suitable for die making, jigs, fixtures, punches, and gauges where dimensional precision matters. Machinists, toolmakers, and tool-and-die professionals are the primary users of this material.\u003c\/p\u003e\u003cp\u003eThis flat stock is used in tool-and-die shops, maintenance machining operations, and prototype fabrication environments. The 36-inch length and 7-inch width offer substantial workable area for layout-intensive projects. Because O1 hardens in oil rather than water, it produces less distortion and cracking risk during the heat-treat process compared to water-hardening grades, which makes it a common choice for flat components that must remain dimensionally stable after hardening. It is well suited to low-to-medium production tooling in both job shops and in-house maintenance departments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel  -  reduced distortion risk during heat treating compared to water-hardening grades\u003c\/li\u003e\n\u003cli\u003eThickness tolerance of plus or minus 0.001 inches for precise fit in precision tooling applications\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of plus 0.005 inches, minus 0.000 inches  -  allows stock removal to final dimension\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.5 inches  -  provides material for facing or squaring the end\u003c\/li\u003e\n\u003cli\u003eSquare tolerance of plus or minus 0.003 inches across the stock\u003c\/li\u003e\n\u003cli\u003eSquareness: edge 0.003 inches per inch of thickness, end 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard AISI Type O1 oil-hardening tool steel flat stock suitable for general toolmaking, die work, jig and fixture fabrication, and other applications requiring a readily machinable steel that responds to oil-quench hardening.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eCutting, grinding, and machining of tool steel flat stock should be performed by qualified machinists or toolmakers using appropriate metalworking equipment. Heat treating O1 to final hardness requires proper temperature control and an oil quench  -  this work should be carried out by personnel familiar with tool steel heat-treat procedures or by a commercial heat-treat facility. Always use eye and hand protection when cutting or grinding steel stock. Verify final dimensions after any thermal processing, as some dimensional change may occur.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.005 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge 0.003 inches per inch of thickness, End 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 18.04 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 57915\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":52041123922226,"sku":"57915","price":296.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_baed9312-76b6-4c19-9d6f-9726e404467f.jpg?v=1790027543","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-57915-o1-tool-steel-flat-stock","provider":"Voomi Supply","version":"1.0","type":"link"}