{"product_id":"drill-rod-tool-steels-57855-o1-tool-steel-flat-stock","title":"Drill Rod Tool Steels 57855 O1 Tool Steel Flat Stock","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 57855 is an O1 oil-hardening tool steel flat stock bar intended for toolmakers, machinists, and die makers who require a precision-ground, ready-to-use blank for dies, punches, gauges, and cutting tools. Conforming to AISI Type O1 specifications, this flat stock measures 1.5 inches thick by 1.5 inches wide by 18 inches long and weighs 11.6 pounds. Thickness tolerance is held to plus or minus 0.001 inches, making it suitable for applications where close dimensional control is required before hardening and finishing.\u003c\/p\u003e\u003cp\u003eO1 tool steel flat stock is used in job shops, tool and die operations, and maintenance machining environments. It is well suited for fabricating short-run punches, form dies, jigs, and fixtures. The 18-inch length supports multiple blanks from a single piece with minimal waste. This stock ships in an annealed condition, allowing conventional machining before oil-quench hardening to final hardness.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type O1 oil-hardening tool steel  -  good machinability in annealed state, high wear resistance after hardening\u003c\/li\u003e\n\u003cli\u003eThickness tolerance of plus or minus 0.001 inches for consistent stock removal during finish grinding\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of plus 0.005 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus 0.25 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003eSquareness held to 0.003 inches on edges and 0.004 inches per inch of thickness on ends\u003c\/li\u003e\n\u003cli\u003eSingle-piece minimum order quantity  -  no bulk commitment required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard AISI Type O1 oil-hardening tool steel flat stock suitable for general tool and die, punch, gauge, and fixture fabrication applications requiring an oil-quenched steel blank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eMachining and hardening of O1 tool steel flat stock is performed by qualified machinists or tool and die makers. The stock is supplied in an annealed condition and should be machined to near-final dimensions before oil-quench hardening. Allow adequate stock for finish grinding after heat treatment to remove scale and correct any distortion. Follow the steel manufacturer's recommended austenitizing and quench procedures for O1 tool steel to achieve target hardness.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI Type O1 Oil Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.005 inches, minus 0.000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquareness\u003c\/strong\u003e: Edge 0.003 inches; End 0.004 inches per inch of thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 11.6 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 57855\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":52046022050098,"sku":"57855","price":215.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_d244a90c-9d69-4516-b165-cbff25225e47.jpg?v=1790030941","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-57855-o1-tool-steel-flat-stock","provider":"Voomi Supply","version":"1.0","type":"link"}