{"product_id":"drill-rod-tool-steels-08712820-a2-tool-steel-flat-stock","title":"Drill Rod Tool Steels 08712820 A2 Tool Steel Flat Stock","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 08712820 is an A2 air-hardening tool steel flat stock bar intended for toolmakers, die makers, and machinist shops requiring tight-tolerance raw material. Measuring 3\/64 inches thick by 1 inch wide by 18 inches long, this flat stock is produced to AISI A2 specification, a chromium-based air-hardening grade known for good dimensional stability during heat treatment and moderate wear resistance. Thickness tolerance is held to plus or minus 0.001 inches, making it suitable for applications where precise stock sizing reduces secondary grinding time before hardening operations.\u003c\/p\u003e\u003cp\u003eA2 air-hardening flat stock is commonly used in the fabrication of punches, dies, form tools, blanking tools, and general-purpose tooling fixtures. Because A2 hardens with an air quench rather than an oil or water quench, distortion after heat treatment is reduced compared to water-hardening grades such as W1. This stock is well suited for tool and die shops, maintenance machining departments, and prototype tooling applications where small, pre-sized flat bar stock in annealed condition is required before machining and heat treating to final hardness.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI A2 air-hardening tool steel  -  reduced distortion during heat treatment compared to water-hardening grades\u003c\/li\u003e\n\u003cli\u003eTight thickness tolerance of plus or minus 0.001 inches for consistent stock removal planning\u003c\/li\u003e\n\u003cli\u003eWidth tolerance held to plus 0.000 to minus 0.005 inches for predictable fit in die sets and fixtures\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus or minus 0.062 inches  -  standard for cut flat bar stock\u003c\/li\u003e\n\u003cli\u003eSquare tolerance of plus or minus 0.003 inches ensures uniform cross-section geometry\u003c\/li\u003e\n\u003cli\u003eSupplied in annealed condition, ready for machining prior to hardening\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard AISI A2 tool steel flat stock suitable for general tool and die fabrication, punch and die applications, and machinist tooling projects requiring an air-hardening grade in small flat bar form.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eMachining and heat treatment of A2 tool steel should be performed by qualified toolmakers or heat treaters familiar with air-hardening tool steel procedures. Follow the steel manufacturer's recommended austenitizing temperature range and air-quench protocol for A2 grade  -  do not substitute with water or heavy oil quench. Inspect stock dimensions with a calibrated micrometer prior to machining to verify tolerance conformance. Personal protective equipment including eye protection and gloves is required during cutting and grinding operations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI A2 Air-Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3\/64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.000 to minus 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus or minus 0.062 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.24 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 08712820\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":52024438620466,"sku":"08712820","price":70.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_7895f7c3-8d9b-45f7-a921-ac969c6819d4.jpg?v=1790014801","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-08712820-a2-tool-steel-flat-stock","provider":"Voomi Supply","version":"1.0","type":"link"}