{"product_id":"drill-rod-tool-steels-02630911-a2-flat-stock-7-32x1-2x36-in","title":"Drill Rod Tool Steels 02630911 A2 Flat Stock 7\/32x1\/2x36 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 02630911 is an A2 air-hardening tool steel flat stock bar cut to 7\/32 inch thick, 1\/2 inch wide, and 36 inches long. A2 tool steel is an air-hardening, cold-work die steel known for its dimensional stability during heat treatment, good toughness, and moderate wear resistance. This flat stock is precision-ground to tight tolerances  -  thickness held to plus or minus 0.001 inch and width held to plus 0.000 to plus 0.005 inch  -  making it ready for use in toolroom and die shop applications. Machinists, toolmakers, and die setters work with this stock to fabricate punches, dies, gauges, and cutting tools.\u003c\/p\u003e\u003cp\u003eA2 flat stock in this size range is commonly used in job shops, toolrooms, and industrial maintenance departments. It is well-suited for applications requiring moderate shock resistance combined with good wear life, such as blanking dies, forming dies, trimming tools, and fixtures. At 36 inches in length, the bar provides enough stock for multiple parts to be machined from a single piece, reducing material waste in short-run and prototype tooling work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA2 air-hardening tool steel  -  offers dimensional stability during heat treat and reduced distortion versus oil-hardening grades\u003c\/li\u003e\n\u003cli\u003ePrecision-ground flat stock  -  thickness tolerance of plus or minus 0.001 inch for close-tolerance toolroom use\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of plus 0.000 to plus 0.005 inch  -  consistent stock sizing for layout and machining setups\u003c\/li\u003e\n\u003cli\u003eSquare tolerance of plus or minus 0.003 inch  -  sides held square for reliable seating in vises and fixtures\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus or minus 0.250 to 0.500 inch  -  standard oversize allowance for facing to final length\u003c\/li\u003e\n\u003cli\u003e36-inch bar length provides flexibility for multiple-part layouts from a single piece of stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard A2 air-hardening tool steel flat bar suitable for general toolroom, die making, and fixture fabrication applications where AISI A2 material specification is required.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA2 tool steel flat stock is cut, ground, and machined by toolmakers and machinists using standard metalworking equipment. Proper personal protective equipment, including eye protection and gloves, should be used during cutting and grinding operations. Heat treatment should be performed by qualified personnel following established procedures for AISI A2 tool steel, including proper preheating, austenitizing, and controlled air-cooling sequences. Do not quench in water or oil  -  A2 is an air-hardening grade and must be cooled in still or moving air to develop correct hardness.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI A2 Air-Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 7\/32 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.000 to plus 0.005 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.003 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus or minus 0.250 to 0.500 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.13 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02630911\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":51972106584370,"sku":"02630911","price":101.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_836a9085-c7fc-450e-8c50-27f31c7794cc.jpg?v=1789962750","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-02630911-a2-flat-stock-7-32x1-2x36-in","provider":"Voomi Supply","version":"1.0","type":"link"}