{"product_id":"drill-rod-tool-steels-02630853-a2-tool-steel-flat-stock","title":"Drill Rod Tool Steels 02630853 A2 Tool Steel Flat Stock","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DRILL ROD TOOL STEELS 02630853 is an A2 air-hardening tool steel flat stock bar used in toolmaking, die work, machining, and fabrication applications. This bar measures 7\/64 inches thick by 1\/2 inch wide by 36 inches long and is manufactured from AISI Type A2 tool steel, a chromium-molybdenum alloy known for its dimensional stability during heat treatment. Thickness tolerance is held to plus or minus 0.001 inches, making this stock suitable for precision tooling blanks and close-tolerance fixture components. Machinists, tool-and-die makers, and metalworking fabricators work with this grade regularly.\u003c\/p\u003e\u003cp\u003eA2 flat stock in this size range is commonly used to produce punches, dies, blades, knives, and forming tools in job shops and production toolrooms. The 36-inch length provides enough bar stock to yield multiple shorter tool blanks from a single piece. Air-hardening characteristics mean this steel hardens in still air rather than requiring an oil or water quench, reducing distortion risk during heat treatment. It is appropriate for both general-purpose tooling and light cutting-edge applications where moderate toughness and good wear resistance are needed.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAISI Type A2 air-hardening tool steel for reduced distortion during heat treat\u003c\/li\u003e\n\u003cli\u003eThickness tolerance of plus or minus 0.001 inches for precision blank applications\u003c\/li\u003e\n\u003cli\u003eWidth tolerance of plus 0.000 to 0.005 inches for consistent fit in tool holders\u003c\/li\u003e\n\u003cli\u003eSquare tolerance of plus or minus 0.003 inches for reliable right-angle reference\u003c\/li\u003e\n\u003cli\u003eLength tolerance of plus or minus 0.250 to 0.500 inches standard for bar stock\u003c\/li\u003e\n\u003cli\u003e36-inch length allows multiple tool blanks from a single piece\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard AISI A2 air-hardening tool steel flat bar suitable for toolroom, die shop, and machining applications requiring A2 grade material in a 7\/64 inch by 1\/2 inch cross-section.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eTool steel flat stock is cut, ground, and machined by qualified tool-and-die makers or machinists using appropriate metalworking equipment. Eye protection, secure workholding, and proper blade selection for the specific material hardness are required. Heat treatment of A2 steel should be performed according to established metallurgical guidelines for AISI A2, including proper pre-heat, austenitizing, and controlled air-cool cycles. Do not attempt to weld or flame-cut hardened tool steel without appropriate procedures.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Tool Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: AISI A2 Air-Hardening\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 7\/64 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 36 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThickness Tolerance\u003c\/strong\u003e: plus or minus 0.001 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: plus 0.000 to 0.005 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e: plus or minus 0.250 to 0.500 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSquare Tolerance\u003c\/strong\u003e: plus or minus 0.003 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.57 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31231200\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DRILL ROD TOOL STEELS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02630853\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DRILL ROD \u0026 TOOL STEELS","offers":[{"title":"Default Title","offer_id":51985381458226,"sku":"02630853","price":52.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0bd010a1cae711f9686084786dbdb869_b0dc6d38-ea4c-4ce6-8ff6-1c8ef3b6b2c4.jpg?v=1789985396","url":"https:\/\/voomisupply.com\/products\/drill-rod-tool-steels-02630853-a2-tool-steel-flat-stock","provider":"Voomi Supply","version":"1.0","type":"link"}