{"product_id":"dremel-536-02-end-brush-1-2-inch-brass-flat-faced-wire","title":"Dremel 536-02 End Brush 1\/2 Inch Brass Flat Faced Wire","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe DREMEL 536-02 is a brass flat faced wire end brush designed for use with rotary tools. The 1\/2 inch brush diameter and hollow center design allow it to reach into slots, recesses, and confined areas where larger brushes cannot fit. Brass wire construction delivers a softer cutting action compared to steel, making it well suited for producing soft, satin, or matte surface finishes without aggressive material removal. The 3 mm steel shank seats securely in standard rotary tool collets and is rated to a maximum of 15,000 RPM. This accessory is installed by HVAC technicians, machinists, maintenance professionals, and experienced DIYers performing light deburring, cleaning, or finishing work.\u003c\/p\u003e\n\u003cp\u003eThis end brush is intended for use on flat surfaces and hard-to-reach areas such as slots, grooves, and tight recesses. The flat faced wire configuration makes it particularly effective for finishing work on metals and other materials where a uniform matte or satin appearance is required. With brass fill material, it is appropriate for use on softer metals, aluminum, copper, and brass components where steel wire would risk excessive surface damage. The package includes 2 brushes per unit.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1\/2 inch brush diameter with hollow center for access to slots and recesses\u003c\/li\u003e\n  \u003cli\u003eBrass flat faced wire fill for soft, satin, or matte surface finishing\u003c\/li\u003e\n  \u003cli\u003e3 mm steel shank compatible with standard rotary tool collets\u003c\/li\u003e\n  \u003cli\u003eRated to 15,000 RPM maximum operating speed\u003c\/li\u003e\n  \u003cli\u003e1-1\/2 inch shank length for extended reach in confined areas\u003c\/li\u003e\n  \u003cli\u003eIncludes 2 brushes per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style rotary tool end brush accessory compatible with rotary tools that accept a 3 mm shank. Verify collet size on the host tool before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by inserting the 3 mm steel shank into the appropriate collet on the rotary tool and tightening per the tool manufacturer's instructions. Always ensure the rotary tool is powered off and unplugged before changing accessories. Do not exceed the 15,000 RPM maximum rated speed. Wear appropriate eye protection when operating wire brush accessories, as wire bristles can dislodge during use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrush Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Flat Faced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Diameter Range\u003c\/strong\u003e: 0.0201 inches and above\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 15,000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHollow Center\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.88 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 2.07 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DREMEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 536-02\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DREMEL","offers":[{"title":"Default Title","offer_id":51538747261234,"sku":"536-02","price":19.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a0a4bcff64edeea199310e61c66e2ce5.jpg?v=1785826050","url":"https:\/\/voomisupply.com\/products\/dremel-536-02-end-brush-1-2-inch-brass-flat-faced-wire","provider":"Voomi Supply","version":"1.0","type":"link"}