{"product_id":"dotco-12l2218-36-air-die-grinder-0-6-hp-18000-rpm","title":"Dotco 12L2218-36 Air Die Grinder 0.6 Hp 18000 Rpm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe DOTCO 12L2218-36 is a pneumatic angle die grinder built for precision material removal, deburring, and surface finishing in demanding shop and field environments. Powered by compressed air at 90 psi, it delivers 0.6 horsepower at a rated speed of 18,000 RPM, with a speed range extending up to 24,999 RPM. The lever throttle provides positive speed control, and the rear exhaust routes spent air away from the work surface. The 1\/4 inch collet accepts standard mounted points, carbide burrs, and grinding stones. Weighing 1.7 pounds and measuring 7.5 inches in overall length, the tool is compact enough for restricted access areas. Licensed machinists, tool and die makers, and metal fabricators are the primary installers and operators.\u003c\/p\u003e\n\u003cp\u003eThe 12L2218-36 is suited for ferrous and non-ferrous metal grinding, weld blending, port matching, and die work in both production and maintenance settings. The 90-degree angle head configuration allows access to recessed bores, pockets, and cavities where inline grinders cannot reach. At 30 CFM air consumption, the tool requires an adequately sized compressor and supply line to maintain consistent performance during extended use. Residential light-duty compressors are generally not sufficient; industrial or shop-grade air supply is expected.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.6 hp output at 18,000 RPM rated speed with a range up to 24,999 RPM\u003c\/li\u003e\n  \u003cli\u003e90-degree angle head for access to confined and recessed work areas\u003c\/li\u003e\n  \u003cli\u003e1\/4 inch collet accepts standard carbide burrs, mounted points, and grinding stones\u003c\/li\u003e\n  \u003cli\u003eLever throttle for controlled variable speed operation\u003c\/li\u003e\n  \u003cli\u003eRear exhaust directs air discharge away from the operator and workpiece\u003c\/li\u003e\n  \u003cli\u003eCE Certified and compliant with DIN EN ISO 12100 and Machinery Directive 2006\/42\/EC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned to accept standard 1\/4 inch shank tooling including carbide burrs, mounted abrasive points, and grinding stones. Requires a 1\/4 inch NPT air inlet connection and a compressed air supply capable of delivering 90 psi at 30 CFM.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and operation should be performed by qualified personnel familiar with pneumatic tool safety practices. Verify that the air supply line is depressurized before connecting or disconnecting the tool, and confirm the supply pressure does not exceed the rated 90 psi. Use properly rated air line fittings and hose rated for the required CFM and pressure. Inspect collet, collet nut, and mounted tooling for wear or damage before each use and never exceed the rated RPM of any accessory mounted in the collet.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorsepower\u003c\/strong\u003e: 0.6 hp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRated Speed\u003c\/strong\u003e: 18,000 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeed Range\u003c\/strong\u003e: 18,000 to 24,999 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAir Pressure\u003c\/strong\u003e: 90 psi (620.53 kPa)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAir Consumption\u003c\/strong\u003e: 30 CFM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCollet Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInlet Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle Type\u003c\/strong\u003e: Angle (90 degrees)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrottle Type\u003c\/strong\u003e: Lever\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExhaust Location\u003c\/strong\u003e: Rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 7.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.7 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: CE Certified, DIN EN ISO 12100, Machinery Directive 2006\/42\/EC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DOTCO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12L2218-36\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DOTCO","offers":[{"title":"Default Title","offer_id":51540690633010,"sku":"12L2218-36","price":1372.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/45b38b6e91d14ff8d7e3dd6b8fe9978d.jpg?v=1785862047","url":"https:\/\/voomisupply.com\/products\/dotco-12l2218-36-air-die-grinder-0-6-hp-18000-rpm","provider":"Voomi Supply","version":"1.0","type":"link"}