{"product_id":"dewalt-dca15150-2-finishing-nails-1-1-2-in-34-deg-2500-ct","title":"Dewalt DCA15150-2 Finishing Nails 1-1\/2 in 34 Deg 2500 Ct","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe DEWALT DCA15150-2 is a box of 2500 bright-finish, 1-1\/2-inch finishing nails engineered for pneumatic finish nailers. Each nail features a smooth shank, round head, and chisel point, loaded into a 34-degree angled stick collation for reliable magazine feeding. The bright finish reduces surface corrosion risk during typical interior finish work. These nails are a standard fastener for trim carpenters, finish carpenters, and millwork installers using compatible angled finish nailers on the job site or in a shop setting.\u003c\/p\u003e\n\u003cp\u003eThese nails are suited for interior finish carpentry applications including door and window casing, base molding, chair rail, crown molding, and light trim assembly. The 1-1\/2-inch length and smooth shank are appropriate for attaching finish trim to wood framing or substrate where minimal splitting and clean surface presentation are required. The 2500-count packaging supports high-volume production work without frequent reloading interruptions.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1-1\/2-inch length suited for interior trim and molding fastening\u003c\/li\u003e\n  \u003cli\u003e34-degree angled stick collation for use in angled finish nailers\u003c\/li\u003e\n  \u003cli\u003eSmooth shank for clean driving and consistent holding in wood substrate\u003c\/li\u003e\n  \u003cli\u003eRound head, chisel point geometry for reliable seating and reduced splitting\u003c\/li\u003e\n  \u003cli\u003eBright finish for standard interior applications\u003c\/li\u003e\n  \u003cli\u003e2500 nails per box for extended use between reloads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in pneumatic finish nailers that accept 34-degree angled stick collation nails in 1-1\/2-inch length. Verify your nailer manufacturer specifications for accepted collation angle and nail gauge before use.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by finish carpenters and trim contractors using a compatible pneumatic angled finish nailer connected to a regulated compressed air supply. Set the compressor pressure to the nailer manufacturer's recommended operating range before loading nails. Wear appropriate eye protection and follow all tool manufacturer safety guidelines. Verify substrate material and nail length selection prior to fastening to avoid blowthrough or inadequate holding strength.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNail Type\u003c\/strong\u003e: Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNail Length\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Bright\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Smooth\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCollation Type\u003c\/strong\u003e: Angled Stick\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCollation Angle\u003c\/strong\u003e: 34 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Round\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Chisel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 2500 nails\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 4.1 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 10.13 inches x 2.25 inches x 1.56 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DEWALT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: DCA15150-2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DEWALT","offers":[{"title":"Default Title","offer_id":51563399512370,"sku":"DCA15150-2","price":36.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1946dc761912887d203a3f65c194622a.jpg?v=1786496819","url":"https:\/\/voomisupply.com\/products\/dewalt-dca15150-2-finishing-nails-1-1-2-in-34-deg-2500-ct","provider":"Voomi Supply","version":"1.0","type":"link"}