{"product_id":"devcon-da051-two-part-epoxy-adhesive-400-ml-cartridge","title":"Devcon DA051 Two-part Epoxy Adhesive 400 Ml Cartridge","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DEVCON DA051 is a fast-curing, two-part epoxy adhesive supplied in a 400 mL cartridge format with a 1:1 mixing ratio. It is designed for structural bonding and repair applications across a wide range of substrates including metal, glass, ceramic, wood, and fabric. Working time runs 3 to 6 minutes after mixing, with a fixture time of 10 to 15 minutes and a full cure achieved in 1.5 hours. The cured bond delivers a shear strength of 1,900 psi and a peel strength of 2 to 3 pli, meeting ASTM D-1002 standards. The clear, rigid bond line suits applications where appearance and structural integrity both matter. Maintenance technicians, millwrights, and facilities tradespeople are the primary installers.\u003c\/p\u003e\u003cp\u003eThis adhesive is suited for industrial maintenance, equipment repair, and fabrication environments where a fast return to service is required. The cartridge format is compatible with standard dual-cartridge dispensing guns, making controlled, consistent mixing straightforward in field and shop settings. Its operating temperature range of -40 to 200 degrees F makes it appropriate for both cold-storage environments and moderate-heat applications such as HVAC equipment housings, pump casings, and metal ductwork repairs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFast cure cycle: 3 to 6 min working time, 10 to 15 min fixture time, full cure in 1.5 hours\u003c\/li\u003e\n\u003cli\u003eHigh shear strength of 1,900 psi meeting ASTM D-1002\u003c\/li\u003e\n\u003cli\u003ePeel strength of 2 to 3 pli for reliable bond durability\u003c\/li\u003e\n\u003cli\u003eBonds to ceramic, fabric, glass, metal, and wood\u003c\/li\u003e\n\u003cli\u003eClear cure color for clean, low-visibility bond lines\u003c\/li\u003e\n\u003cli\u003eWide service temperature range: -40 to 200 degrees F\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for bonding ceramic, fabric, glass, metal, and wood substrates in industrial maintenance and repair applications. Compatible with standard 400 mL dual-cartridge dispensing equipment using a 1:1 ratio mixing nozzle.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eSurface preparation is critical — clean, dry, and abraded surfaces produce the strongest bonds. Dispensing requires a dual-cartridge pneumatic or manual applicator gun; do not attempt to mix by hand from the cartridge. Work within the stated open time and avoid disturbing the joint during fixture. Allow full cure before applying service loads to the bonded assembly.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Two-Part Epoxy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 400 mL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type\u003c\/strong\u003e: Cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing Ratio\u003c\/strong\u003e: 1:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Time\u003c\/strong\u003e: 3 to 6 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixture Time\u003c\/strong\u003e: 10 to 15 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure Time\u003c\/strong\u003e: 1.5 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShear Strength\u003c\/strong\u003e: 1,900 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel Strength\u003c\/strong\u003e: 2 to 3 pli\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Operating Temperature\u003c\/strong\u003e: -40 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Temperature\u003c\/strong\u003e: 200 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASTM D-1002\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.42 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DEVCON\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: DA051\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DEVCON","offers":[{"title":"Default Title","offer_id":51700198048050,"sku":"DA051","price":167.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5c5dea11c7c1fd2b79d3502fce892aa8.jpg?v=1788387515","url":"https:\/\/voomisupply.com\/products\/devcon-da051-two-part-epoxy-adhesive-400-ml-cartridge","provider":"Voomi Supply","version":"1.0","type":"link"}