{"product_id":"devcon-14415-two-part-epoxy-cartridge-400-ml-hp250","title":"Devcon 14415 Two-part Epoxy Cartridge 400 Ml HP250","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe DEVCON 14415 is a two-part epoxy cartridge adhesive in the HP250 series, formulated for high-performance structural bonding in demanding trade and industrial applications. Packaged in a 400 mL cartridge with a 2:1 mixing ratio, this adhesive delivers a working time of 65 minutes, giving technicians sufficient open time for complex assemblies. It achieves a lap shear strength of 3,200 psi per ASTM D-1002 and a peel strength of 35 to 40 pli. Full cure is reached in 24 hours. The tan-colored compound is rated for service from -67 degrees F to 250 degrees F, making it suitable for environments with thermal cycling or wide temperature swings.\u003c\/p\u003e\u003cp\u003eThe DEVCON 14415 is used in mechanical, HVAC, plumbing, and general industrial maintenance applications where a durable, load-bearing adhesive bond is required. Its chemical-resistant and impact-resistant properties make it appropriate for bonding structural components, mounting brackets, and repair work in areas exposed to solvents, vibration, or mechanical stress. Typical installers include maintenance technicians, pipefitters, millwrights, and HVAC service professionals working on metal frameworks, plastic housings, vinyl components, and wood substrates.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e65-minute working time allows extended open time for complex or large-area bonds\u003c\/li\u003e\n\u003cli\u003eLap shear strength of 3,200 psi tested to ASTM D-1002\u003c\/li\u003e\n\u003cli\u003ePeel strength of 35 to 40 pli for resilient, flexible bond performance\u003c\/li\u003e\n\u003cli\u003eRated from -67 degrees F to 250 degrees F for thermal cycling environments\u003c\/li\u003e\n\u003cli\u003eChemical-resistant and impact-resistant formulation\u003c\/li\u003e\n\u003cli\u003eBonds to metal, plastic, vinyl, and wood substrates\u003c\/li\u003e\n\u003cli\u003eReady-to-dispense 400 mL cartridge with 2:1 mix ratio\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for bonding to metal, plastic, vinyl, and wood substrates across a range of industrial and trade maintenance applications. Part of the DEVCON HP250 series of high-performance epoxy adhesives.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis adhesive is installed by maintenance technicians, HVAC professionals, and industrial tradespeople using a compatible dual-cartridge dispensing gun sized for 400 mL cartridges with a 2:1 ratio. Surfaces must be clean, dry, and free of oil or oxidation before dispensing. Dispense and discard a small amount of mixed epoxy before applying to the work surface to ensure the two components are fully combined. Allow the full 24-hour cure time before applying load or stress to the bonded assembly.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: HP250\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type\u003c\/strong\u003e: Two-Part Epoxy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 400 mL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type\u003c\/strong\u003e: Cartridge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixing Ratio\u003c\/strong\u003e: 2:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Time\u003c\/strong\u003e: 65 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure Time\u003c\/strong\u003e: 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLap Shear Strength\u003c\/strong\u003e: 3,200 psi (ASTM D-1002)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel Strength\u003c\/strong\u003e: 35 to 40 pli\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Operating Temperature\u003c\/strong\u003e: -67 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Temperature\u003c\/strong\u003e: 250 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Tan\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdditional Properties\u003c\/strong\u003e: Chemical-Resistant, Impact-Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBonds To\u003c\/strong\u003e: Metal, Plastic, Vinyl, Wood\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.42 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DEVCON\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14415\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DEVCON","offers":[{"title":"Default Title","offer_id":51714727215410,"sku":"14415","price":164.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/14f83bf5dd29f1ce90d7556d8ba0f564.jpg?v=1788505515","url":"https:\/\/voomisupply.com\/products\/devcon-14415-two-part-epoxy-cartridge-400-ml-hp250","provider":"Voomi Supply","version":"1.0","type":"link"}