{"product_id":"de-sta-co-810174-solid-state-npn-sensor-power-clamp","title":"De-sta-co 810174 Solid State Npn Sensor Power Clamp","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe DE-STA-CO 810174 is a solid state proximity sensor configured for NPN output in a normally open switching configuration. It is designed for use as a position-feedback switch on pneumatic power clamp assemblies, providing a DC signal to a PLC or control system when the clamp reaches its target position. The sensor operates on DC supply voltage ranging from 4.5 to 28 volts and carries a maximum continuous current rating of 0.1 amps (100 mA). Maximum voltage drop across the output is 0.5 volts. The compact housing measures 0.93 inches long by 0.53 inches wide by 0.87 inches high, making it suitable for tight mounting envelopes typical of automated fixturing and clamping stations. Installation is performed by automation technicians and machine builders.\u003c\/p\u003e\n\u003cp\u003eThis sensor is intended for pneumatic power clamps equipped with the -MR option, which provides the mechanical interface required to mount and actuate this style of solid state switch. Typical applications include automated welding fixtures, assembly line clamping stations, and robotic work-holding systems where reliable clamped or unclamped position confirmation is required. The NPN normally open output is compatible with standard PLC discrete input cards configured for NPN sourcing logic. The 6.5-inch (165.1 mm) lead wire provides short-run connectivity directly to a junction box or cordset connector at the clamp body.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eNPN output, normally open contact type for direct PLC discrete input wiring\u003c\/li\u003e\n  \u003cli\u003eSolid state switching with no mechanical contacts to wear or arc\u003c\/li\u003e\n  \u003cli\u003eWide supply voltage range: 4.5 to 28 volts DC\u003c\/li\u003e\n  \u003cli\u003e100 mA maximum continuous output current\u003c\/li\u003e\n  \u003cli\u003eMaximum voltage drop of 0.5 volts at full load\u003c\/li\u003e\n  \u003cli\u003eCompact body: 0.93 x 0.53 x 0.87 inches with a 6.5-inch integral lead wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for DE-STA-CO pneumatic power clamps equipped with the -MR option, which provides the required mounting and actuation interface for this solid state sensor.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by automation technicians or electricians familiar with low-voltage DC sensor wiring. De-energize and lock out the pneumatic supply and control power to the clamp circuit before removing or installing the sensor. Verify PLC input card polarity matches the NPN sinking output of this sensor before completing the wiring connection. Route and secure the lead wire away from pinch points, sharp edges, and heat sources to prevent cable damage during clamp cycling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput Type\u003c\/strong\u003e: NPN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContact Type\u003c\/strong\u003e: Normally Open\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor Style\u003c\/strong\u003e: Solid State\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCurrent Type\u003c\/strong\u003e: DC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSupply Voltage\u003c\/strong\u003e: 4.5 to 28 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Output Current\u003c\/strong\u003e: 0.1 amps (100 mA)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Voltage Drop\u003c\/strong\u003e: 0.5 volts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Wattage\u003c\/strong\u003e: 100 mW\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.93 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 0.53 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 0.87 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Length\u003c\/strong\u003e: 6.5 inches (165.1 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31162900\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DE-STA-CO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 810174\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DE-STA-CO","offers":[{"title":"Default Title","offer_id":51996297462066,"sku":"810174","price":116.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6e40a30c8cfee76c4c74836658ac9333.jpg?v=1789993288","url":"https:\/\/voomisupply.com\/products\/de-sta-co-810174-solid-state-npn-sensor-power-clamp","provider":"Voomi Supply","version":"1.0","type":"link"}