{"product_id":"dayton-lamina-s2000-35g-shoulder-bushing-2-in-id","title":"Dayton Lamina S2000-35G Shoulder Bushing 2 in Id","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe DAYTON LAMINA S2000-35G is a die mold shoulder bushing machined from aluminum bronze, engineered for friction-type bushing applications in industrial tooling and die mold assemblies. It features a 2.0000-inch inside diameter with a press-fit attachment method and a self-lubricating construction that reduces the need for external lubrication in service. The bushing carries a tolerance of +0.0000 inches to -0.0600 inches on the bore. Toolmakers, die setters, and machine shop professionals install this bushing in mold bases and die sets where precise, repeatable guidance is required.\u003c\/p\u003e\n\u003cp\u003eThis shoulder bushing is suited for use in die mold bases in manufacturing and tooling environments. The shoulder collar design allows the bushing to seat positively against a mating surface, providing controlled axial location during installation. The self-lubricating aluminum bronze material makes it appropriate for applications where periodic re-lubrication is impractical or undesirable, including high-cycle production tooling.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAluminum bronze construction provides strength, wear resistance, and self-lubricating properties\u003c\/li\u003e\n  \u003cli\u003ePress-fit attachment method for secure, no-fastener installation in die mold bases\u003c\/li\u003e\n  \u003cli\u003eSelf-lubricating friction bushing design reduces maintenance requirements in high-cycle applications\u003c\/li\u003e\n  \u003cli\u003eShoulder collar with 3\/16-inch collar height provides positive axial seating and location\u003c\/li\u003e\n  \u003cli\u003eBore tolerance of +0.0000 inches to -0.0600 inches for controlled fit conditions\u003c\/li\u003e\n  \u003cli\u003eUniform top and bottom outside diameter of 2.5005 inches ensures consistent press-fit engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard component for die mold base assemblies requiring a 2-inch ID shoulder bushing with press-fit installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by a toolmaker or machinist using an arbor press or hydraulic press to drive the bushing into its mated bore. Always verify bore condition and cleanliness before pressing in the bushing to avoid damage to the bore or bushing OD. Do not use impact tools directly on the bushing collar. Confirm that the receiving hole diameter is machined to accept the 2.5005-inch outside diameter within the specified press-fit tolerance before installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Aluminum Bronze\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 2.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBottom Outside Diameter\u003c\/strong\u003e: 2.5005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTop Outside Diameter\u003c\/strong\u003e: 2.5005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCollar Outside Diameter\u003c\/strong\u003e: 2.6800 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Above Collar\u003c\/strong\u003e: 4-3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCollar Height\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBore Tolerance\u003c\/strong\u003e: +0.0000 inches \/ -0.0600 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Type\u003c\/strong\u003e: Shoulder\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBushing Type\u003c\/strong\u003e: Friction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAttachment Method\u003c\/strong\u003e: Press-Fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLubrication Type\u003c\/strong\u003e: Self-Lubricating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: DAYTON LAMINA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: S2000-35G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DAYTON LAMINA","offers":[{"title":"Default Title","offer_id":52083721732402,"sku":"S2000-35G","price":213.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/85005688053c7ac54a4d4d38ce4cdc05_7f3795f0-6013-41ac-98bc-e4cefcd3a130.jpg?v=1790057684","url":"https:\/\/voomisupply.com\/products\/dayton-lamina-s2000-35g-shoulder-bushing-2-in-id","provider":"Voomi Supply","version":"1.0","type":"link"}