{"product_id":"custom-bldg-products-cttsgqt-thin-set-mortar-gray","title":"Custom Bldg Products CTTSGQT Thin Set Mortar Gray","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CUSTOM BLDG PRODUCTS CTTSGQT is a pre-mixed, gray ceramic tile thin set mortar formulated for interior wall and floor tile installations. It requires no mixing on-site, which reduces labor time and eliminates the mess associated with powder-based mortars. The CTTSGQT exceeds ANSI A136.1 Type I standards and is suitable for bonding porcelain, stone, marble, granite, and ceramic tile. Coverage depends on trowel type: a V-Notch trowel at 3\/16 inches by 5\/32 inches yields approximately 10 to 11 square feet per unit, while a Square-Notch trowel at 1\/4 inch by 1\/4 inch by 1\/4 inch yields approximately 5 to 6.25 square feet per unit. Tile installers and flooring contractors are the primary end users.\u003c\/p\u003e\n\u003cp\u003eThe CTTSGQT is designed for interior residential and light commercial tile applications on walls and floors. It supports tiles up to 8 inches by 8 inches under standard dry time, and tiles with one side up to 15 inches when extended dry time is observed. Suitable substrates include properly prepared interior wall and floor surfaces. Coverage figures do not include additional mortar required for back-buttering individual tiles, so installers should account for that when estimating material quantities for larger-format or natural stone applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-mixed formula requires no water or on-site mixing\u003c\/li\u003e\n  \u003cli\u003eExceeds ANSI A136.1 Type I adhesive performance standard\u003c\/li\u003e\n  \u003cli\u003eSuitable for porcelain, stone, marble, granite, and ceramic tile\u003c\/li\u003e\n  \u003cli\u003eSupports tiles up to 8 inches by 8 inches standard, or one side up to 15 inches with extended dry time\u003c\/li\u003e\n  \u003cli\u003eCompatible with both V-Notch and Square-Notch trowel applications\u003c\/li\u003e\n  \u003cli\u003eGray color for use with standard grout joints on interior installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for interior wall and floor tile installations using porcelain, stone, marble, granite, or ceramic tile up to 8 inches by 8 inches, or with one side up to 15 inches when extended dry time is applied.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eTile installers should ensure the substrate is clean, flat, and structurally sound before applying this mortar. Power is not a factor for this product, but work area ventilation should be maintained per local requirements. Do not use on exterior surfaces or in wet immersion areas unless the product labeling and applicable codes confirm suitability. Refer to the Tile Council of North America installation guidelines and applicable local building codes for substrate preparation and coverage requirements.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Gray\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTile Size Limit (Standard)\u003c\/strong\u003e: Up to 8 inches by 8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTile Size Limit (Extended Dry Time)\u003c\/strong\u003e: One side up to 15 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Interior wall and floor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI Standard\u003c\/strong\u003e: Exceeds ANSI A136.1 Type I\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eV-Notch Trowel Coverage\u003c\/strong\u003e: 10 to 11 square feet (3\/16 inches by 5\/32 inches notch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSquare-Notch Trowel Coverage\u003c\/strong\u003e: 5 to 6.25 square feet (1\/4 inch by 1\/4 inch by 1\/4 inch notch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 6 units per case\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 25 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: EA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CUSTOM BLDG PRODUCTS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: CTTSGQT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CUSTOM BUILDING PRODUCTS","offers":[{"title":"Default Title","offer_id":51564282052914,"sku":"CTTSGQT","price":85.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1339209616d46c58e71d9854d5daebd2.jpg?v=1786516264","url":"https:\/\/voomisupply.com\/products\/custom-bldg-products-cttsgqt-thin-set-mortar-gray","provider":"Voomi Supply","version":"1.0","type":"link"}