{"product_id":"culligan-inc-or-34-housing-o-ring-water-filter","title":"Culligan Inc OR-34 Housing O-ring Water Filter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CULLIGAN INC OR-34 is a replacement housing O-ring sized for 0.75-inch filter housings used in residential and light commercial water filtration systems. This elastomer seal fits between the filter housing cap and the sump, preventing bypass leakage and maintaining system pressure integrity. It is a straightforward consumable part that should be replaced any time the housing is disassembled for cartridge service or when the existing O-ring shows cracking, deformation, or signs of a weeping joint. Licensed plumbers and experienced water treatment technicians are the primary installers, though knowledgeable DIYers familiar with whole-house filtration systems routinely perform this service.\u003c\/p\u003e\n\u003cp\u003eThis O-ring is specified for use with the Culligan HF-150A filter housing and the Culligan HF-360 filter housing. It is sold individually and is a direct OEM-referenced replacement for maintaining a watertight seal in those filter assemblies. Replacing this seal during routine cartridge changes is a low-cost preventive measure that protects downstream plumbing and equipment from unfiltered water bypass.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eOEM-referenced replacement O-ring for Culligan 0.75-inch filter housings\u003c\/li\u003e\n  \u003cli\u003eSeals the housing cap-to-sump joint to prevent pressure loss and bypass leakage\u003c\/li\u003e\n  \u003cli\u003eCompact profile: approximately 1.58 inches tall, 1.08 inches wide, and 0.1 inches thick\u003c\/li\u003e\n  \u003cli\u003eLightweight at 0.02 pounds, designed as a routine consumable replacement part\u003c\/li\u003e\n  \u003cli\u003eSold individually (unit of measure: each)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with the Culligan HF-150A filter housing and the Culligan HF-360 filter housing, as specified by the manufacturer.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eShut off the water supply and relieve system pressure using the housing relief button before disassembling the filter housing. Remove the old O-ring and clean the groove thoroughly before seating the new OR-34 to ensure a flat, even fit with no twisting. A light coating of food-grade or NSF-approved silicone grease on the O-ring is standard practice to ease installation and extend seal life. After reassembly, restore pressure slowly and inspect the joint for leaks before returning the system to service.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eItem Height\u003c\/strong\u003e: 1.58 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eItem Width\u003c\/strong\u003e: 1.08 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eItem Thickness\u003c\/strong\u003e: 0.1 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.13 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 9.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 6.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 0.6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e: Each\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHazardous Material\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CULLIGAN INC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: OR-34\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CULLIGAN","offers":[{"title":"Default Title","offer_id":51709934338354,"sku":"OR-34","price":29.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ef3d1a3d84e79313070bebae891a9974.jpg?v=1788462401","url":"https:\/\/voomisupply.com\/products\/culligan-inc-or-34-housing-o-ring-water-filter","provider":"Voomi Supply","version":"1.0","type":"link"}