{"product_id":"crescent-9337cvn-diagonal-cutting-plier-7-in","title":"Crescent 9337CVN Diagonal Cutting Plier 7 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CRESCENT 9337CVN is a 7-inch diagonal cutting plier built for cutting wire and cable in electrical, HVAC, and plumbing rough-in work. The angled head geometry allows technicians to get into tight spaces and cut flush or at an angle without repositioning. The cushion-grip double-dip handles reduce hand fatigue during repetitive cuts. At 0.58 pounds, the tool is light enough for extended use on ladders or in confined equipment bays. The steel jaw construction handles wire up to 12 AWG, with a cutting capacity of 0.5 inches, making it a practical everyday carry for licensed electricians and service techs.\u003c\/p\u003e\n\u003cp\u003eThis plier is suited for residential and light commercial service work where wire cutting, cable trimming, and lead dressing are routine tasks. It fits naturally into HVAC control wiring, thermostat lead preparation, low-voltage panel work, and plumbing fixture rough-in where zip ties or supply lines need to be trimmed cleanly. The 1-inch jaw length and 15\/32-inch jaw thickness give the cutter enough bite to handle solid and stranded conductors up to 12 AWG in standard service scenarios.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAngled head design for flush and close-quarter cuts in confined spaces\u003c\/li\u003e\n  \u003cli\u003eCuts wire up to 12 AWG with a 0.5-inch cutting capacity\u003c\/li\u003e\n  \u003cli\u003eCushion-grip double-dip handles for reduced hand fatigue\u003c\/li\u003e\n  \u003cli\u003eSteel jaw construction for durability in field conditions\u003c\/li\u003e\n  \u003cli\u003eCompact 7-inch overall length suited for tool pouches and tight access points\u003c\/li\u003e\n  \u003cli\u003eNon-insulated — rated for use on de-energized conductors only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose diagonal cutting plier for electrical, HVAC, and plumbing service applications requiring wire cutting up to 12 AWG.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tool is not insulated and must only be used on de-energized conductors — always follow NFPA 70E lockout\/tagout procedures before cutting any wire. Electricians and HVAC technicians should confirm the circuit is de-energized with a calibrated voltage tester before use. Keep jaw surfaces clean and free of debris to maintain cut quality and extend service life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 7 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJaw Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJaw Width\u003c\/strong\u003e: 29\/32 inch (0.91 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eJaw Thickness\u003c\/strong\u003e: 15\/32 inch (0.47 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Capacity\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Capacity\u003c\/strong\u003e: 12 AWG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCut Style\u003c\/strong\u003e: Diagonal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Style\u003c\/strong\u003e: Angled Head\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHandle Material\u003c\/strong\u003e: Double Dip Cushion Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsulated\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Rawhide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.58 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CRESCENT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9337CVN\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CRESCENT","offers":[{"title":"Default Title","offer_id":51689301410098,"sku":"9337CVN","price":37.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/86b3c214ef19c690f1dd413cafb824c8.jpg?v=1788257120","url":"https:\/\/voomisupply.com\/products\/crescent-9337cvn-diagonal-cutting-plier-7-in","provider":"Voomi Supply","version":"1.0","type":"link"}