{"product_id":"crc-industries-3284-dry-moly-lubricant-spray-11-oz","title":"Crc Industries 3284 Dry Moly Lubricant Spray 11 Oz","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe CRC INDUSTRIES 3284 is a dry molybdenum disulfide (moly) lubricant in an aerosol can, engineered to reduce torque on threaded assemblies and sliding surfaces. The gray, fast-evaporating film leaves a dry molybdenum disulfide layer that handles continuous operating temperatures up to 650 degrees F and intermittent peaks up to 750 degrees F. It is classified as a Level III flammable aerosol with a flash point below 0 degrees F, so storage and handling require appropriate care. Licensed trades in HVAC, plumbing, oil and gas, and general mechanical service install this product wherever a dry, clean lubricating film is needed on metal assemblies.\u003c\/p\u003e\u003cp\u003eThe 3284 is formulated as a surface spray lubricant for applications where wet or grease-based lubricants would attract contaminants or interfere with assembly fit. The manufacturer specifically notes suitability for drill pipe lubrication in oil and gas service. It also sees use in mechanical assembly operations, threaded fastener installation, and any joint or sliding interface that requires torque reduction without liquid residue. The propellant is hydrocarbon and the VOC content is 66.3 percent, which must be considered for compliance with local air-quality regulations before use.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDry molybdenum disulfide base forms a clean, non-greasy lubricating film\u003c\/li\u003e\n\u003cli\u003eRated for continuous service up to 650 degrees F and intermittent service up to 750 degrees F\u003c\/li\u003e\n\u003cli\u003eFast evaporation rate leaves only the dry film — no wet residue\u003c\/li\u003e\n\u003cli\u003eAerosol delivery provides even surface coverage on assemblies and pipe threads\u003c\/li\u003e\n\u003cli\u003eReduces torque on threaded and sliding metal assemblies\u003c\/li\u003e\n\u003cli\u003eMade in USA by CRC Industries, Inc.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a surface spray lubricant for metal assemblies requiring dry-film torque reduction, including drill pipe and threaded fastener applications in oil and gas, mechanical, and industrial service environments.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eApplication is performed by qualified tradespeople or mechanical technicians working on assemblies that require dry lubrication. Shake the can thoroughly before use and apply from an appropriate distance to achieve an even film. Because this product carries an Aerosol Flammability Level III rating and a flash point below 0 degrees F, keep it away from open flames, sparks, and high-heat sources during application. Consult local air-quality regulations regarding VOC limits before use in enclosed or regulated work environments.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase Type\u003c\/strong\u003e: Molybdenum Disulfide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilm Type\u003c\/strong\u003e: Dry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type\u003c\/strong\u003e: Aerosol Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 11 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating (Continuous)\u003c\/strong\u003e: 650 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Rating (Intermittent)\u003c\/strong\u003e: 750 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash Point\u003c\/strong\u003e: Less than 0 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoiling Point\u003c\/strong\u003e: 132.9 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloud Point\u003c\/strong\u003e: -138.8 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEvaporation Rate\u003c\/strong\u003e: Fast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePropellant\u003c\/strong\u003e: Hydrocarbon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC Percent\u003c\/strong\u003e: 66.3%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAerosol Flammability Level\u003c\/strong\u003e: Level III\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific Gravity\u003c\/strong\u003e: 0.773\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical State\u003c\/strong\u003e: Liquid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOdor\u003c\/strong\u003e: Solvent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 2.63 inches W x 2.63 inches D x 7.75 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CRC INDUSTRIES\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3284\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CRC INDUSTRIES","offers":[{"title":"Default Title","offer_id":51525146476850,"sku":"3284","price":244.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6c5137e8052dc7269847680ea30c5464.jpg?v=1785465512","url":"https:\/\/voomisupply.com\/products\/crc-industries-3284-dry-moly-lubricant-spray-11-oz","provider":"Voomi Supply","version":"1.0","type":"link"}