{"product_id":"control-devices-rf605t-1-float-valve-1-inch-brass-fip","title":"Control Devices RF605T-1 Float Valve 1 Inch Brass Fip","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe CONTROL DEVICES RF605T-1 is a mechanical float valve designed for automatic liquid level control in tanks, reservoirs, and water storage systems. Built with a brass body in an angle pattern, single-seat configuration, it uses a buoyant float mechanism to open and close flow without external power. The valve accepts 1-inch female iron pipe (FIP) end connections and is rated for a maximum working pressure of 115 psi. Flow capacity reaches 140 gallons per minute at 50 psi, making it suitable for moderate- to high-volume fill applications. Licensed plumbers and irrigation technicians are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis float valve is used in applications where automatic shutoff is needed as a tank or vessel reaches a set level. Typical installations include agricultural water tanks, commercial cooling tower makeup water systems, livestock watering troughs, and industrial liquid storage. The angle pattern body allows for straightforward inline-to-side-entry piping configurations. Operating temperatures are rated from 33 degrees F to 180 degrees F, covering most non-freeze service conditions in both residential and light commercial settings.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBrass valve body provides corrosion resistance in water service applications\u003c\/li\u003e\n  \u003cli\u003eAngle pattern, single-seat design for efficient flow shutoff\u003c\/li\u003e\n  \u003cli\u003e1-inch FIP end connections for standard threaded pipe hookup\u003c\/li\u003e\n  \u003cli\u003eRated to 115 psi maximum working pressure\u003c\/li\u003e\n  \u003cli\u003e140 GPM flow capacity at 50 psi supports high-volume fill demands\u003c\/li\u003e\n  \u003cli\u003eMechanical float operation requires no electrical connection or external power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-install float valve for 1-inch FIP threaded piping systems in tank and reservoir level-control applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off the water supply and depressurize the line before threading the valve into place. Use thread sealant tape or pipe dope rated for potable or non-potable water service as appropriate for the application. Note that this valve is not rated for lead-free or NSF 61 potable water compliance — verify suitability for the intended service before installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Size\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: FIP (Female Iron Pipe)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValve Body Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eValve Pattern\u003c\/strong\u003e: Angle Pattern, Single Seat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Pressure\u003c\/strong\u003e: 115 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlow Rate\u003c\/strong\u003e: 140 GPM at 50 psi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Working Temperature\u003c\/strong\u003e: 33 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Working Temperature\u003c\/strong\u003e: 180 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Free\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 5.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.04 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: CONTROL DEVICES\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: RF605T-1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CONTROL DEVICES","offers":[{"title":"Default Title","offer_id":51542420652338,"sku":"RF605T-1","price":119.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4b431f44ffcbb55440e9dc047a805ada.jpg?v=1785900128","url":"https:\/\/voomisupply.com\/products\/control-devices-rf605t-1-float-valve-1-inch-brass-fip","provider":"Voomi Supply","version":"1.0","type":"link"}